@article{ author = {Golmohammadi, Rostam and Biabani, Azam and shoorche, Davood and Yari, Mohamm}, title = {Design and Build an Adapter for Hearing Protector Test}, abstract ={Introduction: To determine the effectiveness of hearing protective devices that lack the technical information are one of the major challenges of occupational health experts to judge the impact of this exposure on reducing the level of occupational exposure to noise. The aim of this study was to design a built a hearing test adapter and expriment it to determine the reduction rate of earmuffs and earplugs. Methods: Technical information in real environments and glass industries were Hamadan kitchen garden and guards to ensure exceptional performance test results were compared with computational methods. Results: The results of the testing of Personal hearing protection compared with the results in real industry environment and octave-band method, have shown good regrassions average operating transmission losses. Results showed that the average noise reduction between measured and calculations method for earmuffs 9.3, 8.8 dB and 9.3, 11.2 dB for earplugs respectively. Comparison of the tests, did not show significant differences between the results in tow methods (P>0.05). Conclusion: The results of the testing designed Adaptor for some hearing protectors showed that the valid tool for used to reduction rate teste of earmuffs and earplugs.}, Keywords = {Hearing Protection, Sound Attenuation, Actual Test, Adapters}, volume = {3}, Number = {1}, pages = {1-7}, publisher = {Hamedan University of Medical Sciences}, title_fa = {طراحی و ساخت آداپتور آزمون حفاظهای شنوایی}, abstract_fa ={مقدمه: تعیین صحت مندرجات کاتالوگ گوشی‌های حفاظتی و تعیین کارایی گوشی‌هایی که فاقد شناسنامه فنی هستند یکی از چالش های مهم کارشناسان بهداشت حرفه‌ای صنایع جهت قضاوت در خصوص تاثیر این حفاظها در کاهش سطح مواجهه شغلی کارگران با صدا محسوب می گردد. هدف از مطالعه حاضر طراحی یک آداپتور آزمون حفاظهای شنوایی و آزمایش آن جهت تعیین میزان کاهندگی آنها می باشد.  روش بررسی: در فاز اول این مطالعه با استناد به استاندارد 3-4869 ISO و با استفاده از مصالح مناسب آداپتور آزمون وسایل حفاظت شنوایی ساخته شد و در مرحله بعدی آزمایش روی30 نمونه شامل 4 نوع حفاظ رو گوشی و 2 نوع حفاظ توگوشی وارداتی  دارای شناسنامه فنی در محیط واقعی صنایع شیشه و جالیز همدان انجام گردید و نتایج آزمون عملیاتی کارایی حفاظها با روش محاسباتی مورد مقایسه قرار گرفت. یافته‌ها: نتایج حاصل از آزمایش حفاظ شنوایی وارداتی شناسنامه دار در محیط واقعی صنایع و مقایسه با نتایج محاسبات روش اکتاوباند، کارایی یونیت ساخته شده را به خوبی نشان داده است، به طوری که میانگین افت انتقال عملیاتی اندازه‌گیری شده و میانگین افت محاسباتی آنها به ترتیب برای حفاظ های روگوشی 3/9 ،8/8 دسی‌بل و برای حفاظ های توگوشی 3/9 ،2/11دسی‌بل بوده است. مقایسه میانگین‌ها از طریق آزمون آماری، اختلاف معنی داری را بین مقادیر نشان نداد (05/0 P >). نتیجه گیری: نتایج آزمایش یونیت طراحی شده، برای انواعی از حفاظهای شنوایی وارداتی موجود در داخل کشور نشان داد که ابزار مناسبی برای آزمون انواع حفاظهای شنوایی در محیط استفاده می باشد.}, keywords_fa = {حفاظت شنوایی, کاهندگی صدا, آزمون عملیاتی, آداپتور}, doi = {10.21859/johe-03011}, url = {http://johe.umsha.ac.ir/article-1-154-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-154-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Farhadi, Sajad and Mohammadfam, Iraj and Kalatpour, Omi}, title = {Comparative study of Usability of Two Patterns for Developing an Emergency Scenario recommended by International Standard Organization and Homeland Security Exercise Evaluation Program}, abstract ={Introduction: A systematic approach is needed for effective coping an incident. In such a system, the preparedness is the top priority. The organization’s readiness depends on some factors, including regular exercises. To conduct a proper exercise it is necessary to have a comprehensive scenario. Despite of repetitive execution of exercises, there is no commonly accepted template for it. The present study aims at selecting preferred method for developing an emergency exercise. Methods: In the present study, ISO 22398 and HSEEP as the two common patterns were compared through quantifying their usability and chosen by AHP. A panel of crisis experts scored the usability criteria of methods and selected the preferred method. Results: The assessment of usability of both patterns revealed the preference of ISO pattern in comparison with the HSEEP pattern. The HSEEP method had the better score in learnability and satisfaction, but, the effectiveness, efficiency and total score were higher for ISO 22398. Conclusion: To develop an emergency scenario, it is necessary to follow a suitable pattern. The pattern presented by ISO 22398 is more usable in comparison with HSEEP paten.}, Keywords = {Emergency, Scenario, Crisis Management, AHP}, volume = {3}, Number = {1}, pages = {8-16}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی مقایسه ای قابلیت استفاده دو الگوی سناریونویسی سازمان بین المللی استاندارد و برنامه ارزیابی تمرین‌های امنیت ملی آمریکا}, abstract_fa ={مقدمه: جهت مقابله با شرایط اضطراری و مدیریت مؤثر بحران‌ها در سازمان‌ها ، به یک سیستم نظام‌مند نیاز است. مدیریت شرایط اضطراری دارای فازهای مختلفی  مثل پیشگیری، آمادگی، پاسخ و بازیابی است که فاز آمادگی دارای بیش‌ترین اهمیت می­باشد. یکی از مهم‌ترین عوامل موثر در آمادگی برگزاری مانورهای تمرینی هستند. جهت برگزاری مناسب یک مانور، به داشتن سناریویی استاندارد و جامع نیاز است. علیرغم اهمیت سناریونویسی و برگزاری مکرر این تمرین‌ها در صنایع کشور، الگوی پذیرفته‌شده و واحدی جهت سناریونویسی وجود ندارد. هدف این مطالعه ارائه روشی مناسب جهت تهیه یک سناریوی تمرین اضطراری است. روش بررسی: جهت انجام این مطالعه دو الگوی مرسوم سناریونویسی، یعنی ISO 22398 و برنامه ارزیابی تمرین­های امنیت ملی آمریکا مورد استفاده قرار گرفتند. معیار "کاربردپذیری" این دو روش، با استفاده از روش تحلیل سلسله‌مراتبی مقایسه شدند. گروهی از کارشناسان مدیریت بحران، با نمره دهی به معیارهای کاربردپذیری و نهایتاً مقایسه آن‌ها از طریق روش تحلیل سلسله‌مراتبی روش ارجح را انتخاب کردند. یافته‌ها: بررسی کاربردپذیری دو روش نشان داد که الگوی ارائه‌شده توسط استاندارد ISO 22398 از نظر کاربران دارای کاربردپذیری بیش­تری است. در برخی از زیر معیارها مانند سهولت یادگیری و رضایتمندی، روش برنامه ارزیابی تمرین­های امنیت ملی آمریکا دارای ارجحیت بود اما برتری الگوی ایزو در معیارهایی مثل اثربخشی و کارایی باعث برتری نهایی بر الگوی برنامه ارزیابی تمرین­های امنیت ملی آمریکا شد. نتیجه‌گیری: برای تهیه سناریوی تمرینی مانورها باید از الگوهای مناسب استفاده شود. روش ارائه‌شده در الگوی ISO 22398 نسبت به الگوی ارائه‌شده برنامه ارزیابی تمرین­های امنیت ملی آمریکا دارای کاربردپذیری بیش­تری می‌باشد.}, keywords_fa = {شرایط اضطراری, سناریو, مدیریت بحران, تحلیل سلسله مراتبی}, doi = { 10.21859/johe-03012}, url = {http://johe.umsha.ac.ir/article-1-156-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-156-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {ZareSakhvidi, Mohamad javad and Bahrami, Abdulrahman and Ghiasvand, Ali Rez}, title = {Development of Solid Phase Microextraction for Determination of Carbon tetrachloride and Chloroform in Air by Gas Chromatography-Mass Spectrometry}, abstract ={Introduction: In this research the solid phase micro extraction (SPME) for sampling and determination of carbon tetrachloride and chloroform in air was developed and effect of ambient parameters on SPME was assessed. Methods: For this purpose standard chamber was built in the laboratory. The concentrations of compounds in the chamber were measured with SPME. The optimum condition for extraction were determined and compared with 1003 method of national institute occupational safety and health (NIOSH-1003). The samples were analyzed with gas chromatography-mass spectrometry. Results: Carboxen-Poly dimethyl siloxane (CAR/PDMS) has high adsorption in comparing with other fibers and there were no significant differences between sampling rates at different temperatures (range of 20 to 30 °C) and air velocities (2 to 50 cm/s) but, relative humidity (RH) had a significant effect on sampling rates. The results showed that samples can be storage in refrigerator at 4 °C for 3 days. The correlation coefficient of results between SPME and NIOSH-1003 for carbon tetrachloride and chloroform were 0.99 and 0.98 respectively and relative standard deviation of reproducibility between fibers for carbon tetrachloride and chloroform were 13.6 and 12.8 respectively. Conclusion:  This study was showed that SPME was more sensitive than NIOSH-1003 method and successfully applied for determination of time weight average of carbon tetrachloride and chloroform as a passive method.}, Keywords = {SPME, Carbon tetrachloride, Chloroform, Air, Passive sampling}, volume = {3}, Number = {1}, pages = {17-24}, publisher = {Hamedan University of Medical Sciences}, title_fa = {توسعه روش ریزاستخراج فاز جامد برای تعیین تتراکلریدکربن و کلروفرم در هوا به روش گاز کروماتوگراف-طیف بین جرمی}, abstract_fa ={مقدمه: در این پژوهش روش ریزاستخراج فاز برای نمونه برداری از تتراکلریدکربن و کلروفرم هوا توسعه و تاثیر پارامتر های محیطی بر روی عملکرد آن مطالعه گردیده است.  روش بررسی: به این منظور اطاقک استاندارد در آزمایشگاه ساخته شده و نمونه برداری از غلظت آنالیتها در اطاقک با روش  ریزاستخراج فاز جامد انجام گرفت سپس شرایط بهینه استخراج و نمونه برداری تعیین و با روش نمونه برداری استاندارد NIOSH-1003)) مقایسه گردید یافته ها: بررسی های مربوط به انتخاب فیبر نشان داد که فیبر CAR/PDMS خاصیت جذب بالاتری نسبت به سایر فیبرهای مورد مطالعه بوده و نتایج نشان داد که تفاوت معنی داری در نرخ نمونه برداری با دماهای مختلف  (ºC20 تا ºC30) و سرعتهای 2 تا 50 سانتیمتر بر ثانیه وجود ندارد اما رطوبت نسبی بر نرخ نمونه برداری تاثیر می گذارد همچنین نمونه‌های تهیه شده را بمدت 3 روز در یخچال می توان نگهداری نمود. ضریب همبستگی بین اندازه گیری با زغال فعال و روش ریزاستخراج فاز جامد برای کلروفرم و تتراکلریدکربن بترتیب برابر با 99/0 و 98/0 بوده و انحراف معیار نسبی تکرارپذیری بین فیبرها بصورت هفتگی جهت کلروفرم و تتراکلریدکربن بترتیب برابر با 6/13 و 8/12 تعیین گردید. نتیجه گیری: این پژوهش نشان داد که نمونه برداری به روش ریزاستخراج فازجامد دارای حساسیت بالاتر در مقایسه با روش NIOSH-1003)) بوده و  با استفاده از فیبر CAR/PDMS می توان مقدار میانگین مواجهه 8 ساعته را جهت کلروفرم و تتراکلریدکربن به روش غیر فعال تعیین نمود.}, keywords_fa = {ریزاستخراج فاز جامد, هوا, روش غیر فعال, تتراکلریدکربن, کلروفرم, گاز کروماتوگراف-طیف بین جرمی }, doi = { 10.21859/johe-03013}, url = {http://johe.umsha.ac.ir/article-1-180-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-180-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Bayat, Roya and Aliabadi, Mohsen and Golmohamadi, Rostam and ShafieeMotlagh, Masou}, title = {Assessment of exposure to hand-arm vibration and its related health effects in workers employed in stone cutting workshops of Hamadan city}, abstract ={Introduction: The workers employed in stone cutting workplace are exposed to hand-arm vibration and its complications. The aim of this study was to evaluate the exposure to hand-arm vibration and its health effects on workers in the stone cutting workshops. Methods: In this descriptive-analytic study, 40 workers of Hamadan city stone cutting who worked with stone cutting machines were examined. Measuring exposure to hand-arm vibration was performed by standard methods ISO 5349. Symptoms related hand-arm vibration syndrome using a questionnaire construction was studied. Data were analyzed using SPSS software. Results: Results showed that 8-hour equivalent acceleration of hand-arm vibration exposure in stonecuttingworkers was exceeds the permissible exposure levels of country (Pv<0.05). Most average hand and arm vibration acceleration was measured in the Z axis. The average vibration acceleration hand-arm and cutting transverse and longitudinal cutting significant difference was observed (Pv<0.05). Conclusion:  In regard to exposure level of stone cutting workers compared with the national exposure limit, the training of health care, non-smoking, and use of anti-vibration gloves, work rotations canthe effective in reducing the risk of health effects. Furthermore, it seems essential to track the health effects associated with human vibration by use of screening tests in the work place seem.}, Keywords = {Hand-arm vibration, Stone cutting workplace , Health effects, Occupational exposure}, volume = {3}, Number = {1}, pages = {25-32}, publisher = {Hamedan University of Medical Sciences}, title_fa = {ارزیابی مواجهه با ارتعاش دست و بازو و اثرات بهداشتی مرتبط با آن در کارگران سنگبری های شهر همدان}, abstract_fa ={مقدمه :کارگران شاغل در کارگاه های سنگبری در معرض مواجهه با ارتعاش دست و بازو و عوارض ناشی از آن قراردارند. هدف از این مطالعه ارزیابی مواجهه با ارتعاش دست و بازو و اثرات بهداشتی آن در کارگران شاغل درکارگاه های سنگبری می باشد. روش  بررسی: در این مطالعه توصیفی تحلیلی40نفر ازکارگران سنگبری های شهر همدان که با دستگاه های  برش سنگ کار می کردند، مورد بررسی قرار گرفت. اندازه گیری مواجهه با ارتعاش دست و بازو مطابق با روش استاندارد5349ISO  انجام گرفت. علایم مرتبط با بروز سندرم ارتعاش دست و بازو با استفاده از پرسشنامه محقق ساخت مورد بررسی قرار گرفت. اطلاعات بدست آمده با استفاده از نرم افزار SPSS مورد تحلیل قرار گرفت. یافته ها: نتایج نشان داد شتاب معادل 8 ساعته مواجهه با ارتعاش دست و بازو کارگران سنگبری بالاتر از حد مجاز مواجهه کشوری قراردارد (05/0>pv). بیشترین میانگین شتاب ارتعاش دست و بازو در محور Z تعیین گردید. بین میانگین شتاب ارتعاش دست و بازو  ناشی از دستگاه های برش عرضی و برش طولی اختلاف معنادار مشاهده گردید(05/0>pv). نتیجه گیری:با توجه به بالا بودن سطح مواجهه شغلی کارگران از حد مجاز مواجهه شغلی ، آموزش مراقبت های بهداشتی ،عدم استعمال دخانیات و استفاده از دستکش ضد ارتعاش، چرخش های کاری می تواند بر کاهش ریسک بروز اثرات بهداشتی موثر باشد. علاوه بر این ردیابی اثرات بهداشتی مرتبط با ارتعاش با استفاده از آزمون های غربالگری در کارگاه های سنگبری ضروری به نظر می رسد.}, keywords_fa = {ارتعاش دست و بازو, کارگاه سنگبری, اثرات بهداشتی, مواجهه شغلی}, doi = { 10.21859/johe-03014}, url = {http://johe.umsha.ac.ir/article-1-157-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-157-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Motamedzade, Majid and Saedpanah, Keivan and Salimi, Keivan and Eskandari, Tahereh}, title = {Risk assessment of musculoskeletal disorders by Muscle Fatigue Assessment method and implementation of an ergonomic intervention in Assembly industry}, abstract ={Introduction: Musculoskeletal disorders are a major part of occupational diseases in working environments. The aim of this study was evaluates the risk factors of musculoskeletal disorders by the assessment of Muscle Fatigue Assessment method (MFA). It also sought to determine the effects of an ergonomic intervention on the mentioned risk in an Assembly industry. Methods: This study conducted on 15 people working in the Assembly line. Medical records of Assembly line workers were reviewed and Nordic Musculoskeletal Questionnaires (NMQ) after one year of intervention was completed. Activities of these workers in Assembly line were evaluated by Muscle Fatigue Assessment method (MFA) and workers were given the necessary training. Data were analyzed in SPSS-16. Results: The initial evaluations showed that neck, back, leg and knee, respectively in 6.67, 20 and 13.33 percent were in the "very high" priority corrective measures. Re-assessments after the intervention showed that Percent of people with musculoskeletal disorders in the neck in the "very high" corrective actions changed to zero. The percent of organs at the level of "high" corrective actions before the intervention was greatly reduced. For example, around the waist from 60% to 33.33% and neck from 53% to 26.27% after intervention were reduced. A total of 30 cases of abnormalities detected before the intervention, after intervention, this number reduced to 11. Conclusion: According to MFA Score, risk of musculoskeletal disorders was reduced by intervention in this industry and According to Questionnaire, prevalence of musculoskeletal disorders also significantly reduced.}, Keywords = {Musculoskeletal disorders, Ergonomic intervention, Muscle Fatigue, Assessment method}, volume = {3}, Number = {1}, pages = {33-40}, publisher = {Hamedan University of Medical Sciences}, title_fa = {ارزیابی ریسک ابتلا به اختلالات اسکلتی عضلانی به روش ارزیابی خستگی عضلانی و اجرای مداخله ارگونومی دریک صنعت مونتاژ}, abstract_fa ={مقدمه: اختلالات اسکلتی- عضلانی بخش عمده‌ای از بیماری‌های شغلی را در محیط‌های کاری به خود اختصاص می‌دهند، هدف این مطالعه ارزیابی ریسک فاکتورهای اختلالات اسکلتی عضلانی با استفاده از روش ارزیابی خستگی عضلانی (MAF) و اجرای مداخله ارگونومی و تأثیر آن‌ها بر کاهش سطح ریسک بود. روش بررسی: در این مطالعه مداخله‌ای  15نفر از کارگران خط مونتاژ به صورت سرشماری انتخاب شدند. مستندات پزشکی این افراد مورد بررسی قرار گرفت و آنان پرسشنامه نوردیک را بعد از یک سال از مداخله صورت گرفته تکمیل کردند. فعالیت این افراد در بخش خط مونتاژ با استفاده از روش ارزیابی خستگی عضلانی (MAF) ارزیابی‌شده و کارگران آموزش‌های لازم را دیدند. تجزیه و تحلیل داده‌ها با استفاده از نرم‌افزار SPSS-16 انجام شد. یافته‌ها: ارزیابی اولیه نشان داد که اندام‌های گردن، کمر، پا و زانو به ترتیب در 67/6، 20 و 33/13 درصد از کارگران در سطح "خیلی زیاد" اولویت اقدام اصلاحی است. بعد از انجام مداخلات، درصد افراد مبتلا به اختلالات اسکلتی عضلانی در ناحیه گردن در سطح "خیلی زیاد" اقدامات اصلاحی به صفر رسید. همچنین اندام‌های که در سطح "زیاد" اقدامات اصلاحی قبل از مداخله قرار داشتند درصد آن‌ها تا حد زیادی کاهش یافت. مثلاً در ناحیه کمر از 60 درصد بعد از مداخله به 33/33 درصد و  در ناحیه گردن این اختلالات از 53 درصد به 27/26 درصد کاهش یافت. در مجموع از 30 مورد اختلالات شناسایی‌شده قبل از مداخله با مداخله صورت گرفته این تعداد به 11 مورد رسید. نتیجه‌گیری: با اجرای اقدامات اصلاحی در این صنعت طبق روش ارزیابی خستگی عضلانی  سطح ریسک ابتلا به اختلالات اسکلتی عضلانی و بر طبق پرسشنامه نوردیک میزان شیوع این اختلالات به میزان قابل‌توجهی کاهش یافت}, keywords_fa = {اختلالات اسکلتی عضلانی, مداخله ارگونومی, روش ارزیابی خستگی عضلانی}, doi = {10.21859/johe-03015}, url = {http://johe.umsha.ac.ir/article-1-161-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-161-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Babaei, Morteza and GorbaniShahna, Farshid and Bahrami, Abdolrahm}, title = {Comparative study of cost-benefit integrated system of water spary with industrial ventilation and bag filters in a minerals processing company}, abstract ={Introduction: Control of fugitative dust from mining process and application of an appropriate and economical system for dust collecting is essential. The goal of this study was cost-benefit analysis of an integrated systems and compare to bag filter in a crushing plant of a mining company. Methods: A local exhaust ventilation system for capture of emitted particlees, a water spray for dust suppresion at sources and parallel Stairmand model cyclones as dust colletor were designed and installed based on the standards and guidelines. Then, efficiency of wetting and industrial ventilation system for control of ambient dust personal exposure and environmental emission have evaluated as integrated and alone. Finally, cost-benefit analysis of this system was compared to bag filter. Results: The efficiency of this system for control personal exposure repairable particles and emitted dust to ambient air was 87% and 95% for plant 1 and 88% and 95% for plant 2, respectively. The concentration of emitted emitted dust from stack to environment were 121.28 mg/m3 and 112/68 mg/m3 for plant 1 and 2, respectively. The capital, operational and maintence costs of this option was  217 and 0.992 billion rials lower than bag filter. Also, annuall collected dust by cyclones was worth 518 million rial. Conclusion: According to results, integrated system had a significant impact on emitted dust in workplace and environment. The economical analysis domonstrated 73% and 80% savings in capital and operational costs compared to bag filter. Total costs of implented project will be compensated at 220 day with recovered dusts, therefore, in the same condition, it can be suggested as the favourable and economical solution.}, Keywords = {Cost-benefit, Water spray, Cyclone, Bag filters, Dust}, volume = {3}, Number = {1}, pages = {41-50}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی مقایسه‌ای هزینه-سود سیستم تلفیقی تهویه صنعتی و مرطوب‌سازی با فیلتر خانه در یک شرکت فرآوری مواد معدنی}, abstract_fa ={مقدمه : کنترل ذرات منتشره از فرآیندهای فرآوری مواد معدنی و انتخاب سیستم‌های اقتصادی و مناسب کنترل آلودگی هوا یک امر ضروری است. این مطالعه باهدف بررسی هزینه-سود سیستم کنترل آلودگی اجراشده در واحدهای سنگ‌شکن یک شرکت فرآوری مواد معدنی و مقایسه آن با پالایش گر پرهزینه‌تر فیلترخانه صورت گرفت. روش بررسی : سیستم تهویه مکنده موضعی، مرطوب سازی و سیکلون های بازده بالای مدل استایرمند با اقتباس از استانداردها و راهنماهای موجود، طراحی و نصب شد. سپس عملکرد سیستم مرطوب سازی و تهویه صنعتی به صورت مجزا و تلفیقی در کنترل ذرات منتشره در هوای محیط کار، مواجهه فردی و انتشار زیست‌محیطی مورد ارزیابی قرار گرفت. در نهایت آنالیز هزینه-سود این سیستم در مقایسه با سیستم پرهزینه‌تر فیلتر خانه مورد بررسی قرار گرفت. یافته‌ها : بازده سیستم تلفیقی در کاهش میزان مواجهه فردی و غبار محیطی در خط یک سنگ‌شکن به ترتیب 87 و 95 درصد و در خط دو سنگ‌شکن 88 و 95 درصد بود. همچنین غلظت غبار خروجی از سیستم تهویه در خط یک و دو سنگ‌شکن به ترتیب mg/m3 28/121 و mg/m3 68/112 به دست آمد. هزینه ساخت و راهبری سالیانه سیستم تلفیقی نسبت به فیلتر خانه به ترتیب 17/2 میلیارد ریال و 992 میلیون ریال کاهش‌یافته است و سود سالانه جمع‌آوری غبار معدنی توسط سیکلون 518 میلیون ریال برآورد شد.  نتیجه‌گیری: با توجه به نتایج به دست آمده سیستم تلفیقی اجراشده کاهش قابل‌توجهی از غبار منتشره در محیط کار و محیط‌زیست را داشته است. همچنین مطابق با تحلیل‌های اقتصادی صورت گرفته، در هزینه‌های ساخت و راهبری سالیانه سیستم تلفیقی در مقایسه با فیلتر خانه به ترتیب 73 و 80 درصد صرفه‌جویی شده است و در کمتر از 220 روز هزینه ساخت و اجرای پروژه از سود جمع‌آوری غبار معدنی توسط سیستم تلفیقی، جبران خواهد گشت بنابراین می‌توان در شرایط مشابه این سیستم را به عنوان یک راهکار مناسب و اقتصادی پیشنهاد داد.}, keywords_fa = {هزینه-سود, مرطوب‌سازی, سیکلون, فیلتر خانه, غبار}, doi = {10.21859/johe-03016}, url = {http://johe.umsha.ac.ir/article-1-165-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-165-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Shahedialiabadi, Sara and Assari, Mohammad Javad and Kalatpour, Omid and Zarei, Esmaeil and Mohammadfam, Iraj}, title = {Consequence modeling of fire on Methane storage tanks in a gas refinery}, abstract ={Introduction: using fossil fuels, some hazards such as explosion and fire are probable. This study was aimed to consequence modeling of fire on Methane storage tanks in a gas refinery using analyzing the risk, and modeling and evaluating the related consequences. Method: Hazard analysis by PHA was used to choosing the worst-case scenario. Then, causes of the scenario were determined by FTA. After that, consequence modeling by the PHAST software was applied for the consequence analysis. Results: Based on some criteria, the fire of methane gas tank (V-100) was selected as the worst-case scenario at the refinery. The qualitative fault tree showed three factors including mechanical, process, and human failures contribute in gas leakage. The leakage size and weather conditions were effective on the distance of radiation. Using consequence modeling, thermal radiation was considered as the major outcome of the incident. Finally, for outcome evaluating, probit equations were used to quantify losses and the percentage of fatalities due to the methane gas leakage and fire occurrence. The maximum number of fatalities caused by fire was obtained 23 persons. Conclusions: In conclusion, the methane gas vessel in the refinery can be considered as the main center of hazard, therefore the implementation of the safety rules, eliminating mechanical failures, personal protection and education, and Effective measures to prevent and fighting of fire are proposed for decreasing the probable losses and fatalities.}, Keywords = {Risk analysis, Consequence modeling, Fire, Gas refinery}, volume = {3}, Number = {1}, pages = {51-59}, publisher = {Hamedan University of Medical Sciences}, title_fa = {ارزیابی پیامد حریق مخازن گاز متان در یک پالایشگاه گاز}, abstract_fa ={مقدمه: کاربرد سوخت های فسیلی در پالایشگاه ها همواره احتمال بروز خطراتی چون حریق و انفجار را به همراه خواهد داشت. وقوع چنین حوادثی همواره آثار جدی بر منابع مالی و جانی داشته است. در همین راستا این مطالعه با ارزیابی پیامد حریق مخازن گاز متان با استفاده از تجزیه و تحلیل خطر و مدل سازی و ارزیابی پیامدهای احتمالی انجام شد. روش بررسی: در راستای انتخاب بدترین سناریو، از روش تجزیه و تحلیل مقدماتی خطر PHA استفاده شد. سپس علل وقوع سناریو با کمک روش FTA تعیین گردید. در نهایت مدل سازی و ارزیابی پیامد وقوع سناریو انتخابی با استفاده از نرم افزار PHAST انجام گرفت. یافته ها: بر اساس معیارهای مدنظر، حریق مخزن گاز متان V-100 به عنوان بدترین سناریو در پالایشگاه انتخاب شد. درخت خطا سه عامل مکانیکی، انسانی و فرآیندی را در نشت گاز موثر نشان داد. با استفاده از مدل سازی پیامد، تشعشع حرارتی ناشی از حریق به عنوان پیامد اصلی وقوع حادثه در نظر گرفته شد. شرایط آب و هوایی و اندازه نشتی در فاصله تحت تاثیر تشعشع موثر بودند. در نهایت از معادلات پرابیت برای ارزیابی میزان خسارات انسانی حادثه استفاده گردید. حداکثر تعداد تلفات ناشی از حریق برابر با 23 نفر بود. نتیجه گیری: در این مطالعه مخزن گاز متان به عنوان کانون اصلی خطر معرفی شد. در همین راستا اجرای قوانین ایمنی، برطرف کردن نقایص مکانیکی در اسرع وقت، برگزاری دوره های آموزشی، اقدامات موثر در پیشگیری و اطفاء حریق در راستای کاهش تعداد تلفات پیشنهاد شد.}, keywords_fa = {مدل سازی پیامد, آنالیز ریسک, حریق, پالایشگاه گاز}, doi = {10.21859/johe-03017}, url = {http://johe.umsha.ac.ir/article-1-173-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-173-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Biabani, Azam and Aliabadi, Mohsen and Golmohamadi, Rostam}, title = {Study of performance of acoustic fixture for using in noise reduction rate tests of hearing protection devices}, abstract ={Introduction:One of the recommended methods for evaluation effectiveness of hearing protection is use the acoustic fixture accordance with standard ISO 4869-3. The aim of this study was evaluate the acoustic performance of fixture for using in noise reduction rate  tests of hearing protection devices in the laboratory. Methods: In this cross-sectional study , noise reduction rates of  five common ear muffs used in the Iran industries were investigated based on the ISO 11904 standard, microphone in real ear method, using noise dosimeter (SVANTEK , Model SV102) equipped with microphone SV25 model which can install inside the ear on 30 subjects under laboratory conditions. Also, noise reduction rate of earmuffs was determined using the fixture model AVASINA9402 accordance with standard procedures.  Data were analyzed using the software SPSS21. Results: The results showed the real noise reduction rates of the earmuffs on the studied subjects are from 59% to 94% nominal reduction rates. That rates for the ear muffs on the studied fixture are from 64% to 92.The results showed that the noise reduction rates of the ear muffs on subjects compared with and noise reduction rates of the ear muffs on fixture were not statistically significant (p> 0.05). Conclusion: The results showed the accuracy of noise reduction rate of earmuffs using the fixture compared with real subjects is acceptable. Hence, the fixture is good choice for environments where there’s no possibility of acoustic evaluation on real subjects, also for quality control of productions in the earmuff manufacturers.}, Keywords = {: Hearing protection devices, Acoustic fixture, Noise reduction rate, Microphone in real ear method}, volume = {3}, Number = {1}, pages = {60-66}, publisher = {Hamedan University of Medical Sciences}, title_fa = {ارزیابی عملکرد آکوستیکی مانکن سر جهت استفاده در آزمون های تعیین قدرت کاهندگی صدای وسایل حفاظت شنوایی}, abstract_fa ={مقدمه: یکی از روش های توصیه شده جهت ارزیابی کارایی وسایل حفاظت شنوایی استفاده از مانکن سر مطابق استاندارد3-4869 است. هدف از این مطالعه ارزیابی عملکرد آکوستیکی مانکن سر طراحی شده جهت استفاده در آزمون های تعیین قدرت کاهندگی صدای وسایل حفاظت شنوایی در شرایط آزمایشگاهی می‌باشد. روش بررسی: دراین مطالعه توصیفی تحلیلی ابتدا قدرت کاهندگی صدای پنج مدل گوشی ایرماف رایج در صنایع کشور برمبنای روش میکروفن داخل گوش طبق استاندارد ISO11904-1 توسط دستگاه دزیمتر SV102 شرکتSVANTEKمجهز به میکروفن SV 25 قابل نصب داخل گوش در شرایط آزمایشگاهی روی 30 نفر تعیین گردید. همچنین قدرت کاهندگی گوشی های مذکور با استفاده از مانکن آکوستیکی سر مطابق استاندارد تعیین گردید. داده ها توسط نرم افزار SPSS 21 مورد تحلیل قرار گرفت. یافته ها: نتایج نشان داد نسبت قدرت کاهندگی واقعی صدای گوشی ها به کاهندگی اسمی با بررسی روی افراد در محدوده بین 59% الی 94% قرار دارد. این نسبت برای گوشی های مذکور روی مانکن سر بین 64%الی 92% قرار داشت. نتایج آزمون آماری نشان داد بین میانگین کاهندگی صدای گوشی ها روی افراد به عنوان نمونه واقعی و مانکن سر اختلاف معنی داری وجود ندارد (05/0 p> ). نتیجه گیری: نتایج نشان داد تعیین قدرت کاهندگی صدای گوشی ها توسط مانکن سر از صحت کافی در مقایسه با نمونه های واقعی برخوردار است. لذا برای محیط‌ هایی که امکان آزمون کارایی گوشی ها بر روی نمونه واقعی وجود ندارد و همچنین جهت کنترل کیفیت تولید در شرکت های سازنده گوشی، استفاده از مانکن سر گزینه مطلوبی است.   }, keywords_fa = {وسایل حفاظت شنوایی, مانکن سر, قدرت کاهندگی صدا, روش میکروفن داخل گوش}, doi = {10.21859/johe-03018}, url = {http://johe.umsha.ac.ir/article-1-174-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-174-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Mirzaeialiabadi, Mostafa and MohammadFam, Iraj and Kalatpour, Omid and Babayimesdaraghi, Yousef}, title = {Risk assessment of liquefied petroleum gas (LPG) storage tanks in the process industries using the Bowtie technique}, abstract ={Introduction: LPG storage tanks contain of large volumes of flammable and pressurized gases. Release of these fluids can lead to disastrous accidents such BLEVE, fiery explosion. Therefore, identifying the causes, consequences, probabilities and scenarios of accidents using Bowtie technique, that is combination of Fault Tree Analyses (FTA) and Event Tree Analyses (ETA), is imperative and the purpose of this study. Methods: The hazards of the mentioned in Tehran Refinery LPG tanks were identified by Fault Tree Analyses and the consequences of the top event were predicted by Event Tree Analyses. Then probabilities of the events were calculated and the accident route, from causes phase to consequences phase, was drawn by Bowtie diagram. Results: In total, 21 events and 11 minimal cut sets with their occurrence probabilities and importance measure were determined at the left side of the Bowtie diagram. Also 9 consequences and scenarios of the top event were determined at the right side of the diagram. The occurrence probability of the top event (LPG release of spherical tanks) was calculated 3.45×10-2. Conclusion: All factors involved in the occurrence of accidents and their consequences are showed in the Bowtie diagram. According to the obtained data, failure of cathodic protection systems and instrumentation, and overflow of tanks are included as important defects of the LPG tanks. Due to the high probability of the consequences, preventing systems such as cooling systems and Fire stop systems are required for installing in the studied unit to reduce the consequences of accidents.}, Keywords = {Fault Tree Analyses, Event Tree Analyses, Bowtie, liquefied petroleum gas, process industries.}, volume = {3}, Number = {2}, pages = {1-11}, publisher = {Hamedan University of Medical Sciences}, title_fa = {ارزیابی ریسک مخازن ذخیره سازی گاز نفتی مایع شونده در صنایع فرایندی با استفاده از تکنیک پاپیونی}, abstract_fa ={مقدمه: در مخازن ذخیره سازی LPG مقدار زیادی گازهای قابل اشتعال تحت فشار نگهداری می­شود. رهایش محتویات این مخازن می­تواند به پیامدهایی  مانند BLEVE و انفجارهای آتشین منجر شود. بنابراین، شناسایی علل و پیامدها و سناریوهای حوادث و تعیین احتمال رخداد آنها با استفاده از روش پاپیونی (Bowtie) که از ترکیب دو روش آنالیز درخت خطا و آنالیز درخت رویداد حاصل می­شود امری ضروری بوده و هدف این مطالعه می­باشد. روش بررسی: در این مطالعه که در سال 1395 انجام شده است خطرات موجود در مخازن LPG پالایشگاه تهران با روش FTA شناسایی و پیامدهای بعد از رویداد اصلی با استفاده از ETA پیش­بینی شده و احتمالات هرکدام محاسبه و با استفاده از دیاگرام Bowtie مسیر حادثه از فاز علل تا فاز پیامدها ترسیم و بررسی گردید. یافته ها: در مجموع 21رویداد و 11برش حداقل همراه با احتمالات رخداد و میزان اهمیت هریک در سمت چپ و 9 پیامد و سناریو بعد از رویداد اصلی همراه با احتمالات هریک در سمت راست دیاگرام Bowtie مشخص گردید. احتمال وقوع رویداد اصلی(رهایش  LPG از مخزن کروی) 3.45×10-2 محاسبه شد. نتیجه ­گیری: همه عوامل دخیل در رخداد حوادث و پیامد­ها بصورت تصویری در دیاگرام نمایش داده می­شود. با توجه به دادهای بدست آمده، بدلیل احتمال بالای پیامد نیاز به تعبیه سیستم های fire stopمی­ باشد.}, keywords_fa = {آنالیز درخت خطا, آنالیز درخت رویداد, گاز نفتی مایع شونده , صنایع فرایندی}, doi = {10.21859/johe-03021}, url = {http://johe.umsha.ac.ir/article-1-186-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-186-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Goodarzi, Rahim and Arghami, Shirazeh and Pouyakian, Mostaf}, title = {Identification of factors affecting safety culture in Iranian thermal power plants}, abstract ={Introduction: safety culture is a term which is used repeatedly in the assessment of safety status of companies. The aim of present study was to investigate the parameters and factors influencing organizational safety culture in the Iranian thermal power plants industry. Method: Triangulation approach was used for data generation in this grounded theory study. Nineteen participants from a variety of work groups at three thermal power plants of Iran (Shazand, Shahid rajaei Ghazvin and ramin Ahwaz) took part in focus group interviews, individual interviews, field observations, and focus group discussions. Thematic analysis was conducted to emerge and identify the contributing factors.  Results: The thematic analysis identified 9 sets of parameters in achieving the safety culture as follows: (1) training, briefing and competency (2) vision, leadership and commitment (3) lows, rules and work procedures (4) safety and crisis management (5) individual agents (6) Management style and organizational communication (7) participation and commitment of personnel, supervisors and middle managements. (8) Non organizational agents (9) to make available of foundations and source managements Conclusion: The results indicated that an improvement in each parameter is necessary to achieve top safety culture. Moreover, proportionate to the conditions of each company in the periods set, should be taken for the betterment actions of safety status and accomplishing pre-determined targets.}, Keywords = {safety culture, thermal power plant, qualitative research.}, volume = {3}, Number = {2}, pages = {12-20}, publisher = {Hamedan University of Medical Sciences}, title_fa = {شناسایی مولفه‌های مؤثر بر فرهنگ ایمنی در نیروگاههای حرارتی تولید برق ایران}, abstract_fa ={مقدمه: فرهنگ ایمنی واژه ای است که مکررا و در ارزیابی وضعیت ایمنی شرکتها مورد استفاده قرار می گیرد. هدف از مطالعه حاضر بررسی مولفه های موثر بر فرهنگ ایمنی سازمانی در نیروگاههای حرارتی  ایران  است. روش بررسی: دراین مطالعه کیفی از نوع نظریه مبنایی، داده ها با استفاده از رویکرد تلفیقی و از طریق مشاهده میدانی، مصاحبه انفرادی، مصاحبه و بحثگروهی متمرکز با 19نفر از گروه های کاری مختلف در سه نیروگاه حرارتی ایران(شازند، شهید رجایی قزوین و نیروگاه رامین اهواز) تولید شد. روش تحلیل مضمون در استخراج و تعیین فاکتورهای موثر استفاده شد. یافته ها: تحلیل محتوا نه دسته از مولفه های موثر بر فرهنگ ایمنی را شناسایی نمود که عبارت بودند از: (1) آموزش، آگاهی و صلاحیت (2) نگرش، رهبری و تعهد مدیریت ارشد سازمان 3) قوانین و مقررات، رویه ها و دستورالعملهای کاری (4) مدیریت ایمنی و بحران( (5) عوامل فردی (6) سبک مدیریت و ارتباطات سازمانی (7) مشارکت و تعهد سازمانی کارکنان، سرپرستان و مدیران میانی (8) عوامل برون سازمانی (9) تامین زیر ساختها و مدیریت منابع. نتیجه گیری: نتایج نشان داد که برای دستیابی به یک فرهنگ عالیه ایمنی می بایست با بهبود وضعیت در هر یک از مولفه های شناسایی شده، متناسب با شرایط هر سازمان در بازه های زمانی تعیین شده نسبت به ارزیابی وضعیت فرهنگ ایمنی و بهبود آن و دسترسی به اهداف از پیش تعیین شده اقدام نمود.}, keywords_fa = {فرهنگ ایمنی, نیروگاههای حرارتی , پژوهش کیفی}, doi = {10.21859/johe-03022}, url = {http://johe.umsha.ac.ir/article-1-171-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-171-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {KarimiZeverdegani, Sara and Barakat, Samira and Yazdi, Maryam}, title = {Evaluation of organic solvents effects on physiological parameters of exposed people in industry}, abstract ={Introduction: One of the most common chemical exposures is organic solvents in the workplace and some of them are toxic to human health. The purpose of this study was to determine the organic solvents effect on physiological parameters of exposed people in industry. Methods: This study was descriptive - analytical and in terms of time cross-sectional that the 50 workers were employed in the home appliance industry. The data were collected in three stages: 1) through observation and interview 2) reviewing periodic examinations of workers 3) measure the concentration of BTEX. Descriptive and analytical statistics analysis was performed with SPSS software version 20. Results: According to the results obtained spirometry parameters in the exposed group (FEV1=89.62±10.53) is lower than the non-exposed (FEV1=97.32±8.92) while the average liver enzymes in exposed workers (SGOT= 29.56±9.49 and SGPT=38.67±17.5) was higher than non-exposed (SGOT= 17.5±6.38 and SGPT=21.11±8). Conclusion: Long-term exposure to BTEX leads to a reduction in respiratory capacity, and increase liver enzymes. So, with proper engineering and management controls and periodic examination of such problems can be prevented in workers.}, Keywords = {Organic solvents, BTEX, Exposure, Spirometry, liver enzyme}, volume = {3}, Number = {2}, pages = {21-26}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی اثر حلال های آلی بر پارامترهای فیزیولوژیک افراد مواجهه یافته در یک صنعت}, abstract_fa ={مقدمه: حلال های آلی یکی از شایعترین مواجهات شیمیایی محیط کار هستند و برخی از آنها از نظر بهداشتی برای انسان سمی هستند. هدف از مطالعه حاضر تعیین اثر حلال های آلی بر پارامترهای فیزیولوژیک افراد مواجهه یافته در یک صنعت بود. روش بررسی: این مطالعه توصیفی – تحلیلی و از نظر زمانی مقطعی بود که بر روی 50 نفر از کارگران شاغل در صنعت لوازم خانگی انجام شد. داده های مورد نیاز در 3 مرحله جمع آوری گردید: 1) از طریق مشاهده و مصاحبه 2) بررسی پرونده معاینات دوره ای کارگران3 ) سنجش غلظت BTEXها. تجزیه و تحلیل آمار توصیفی و تحلیلی با نرم افزار آماری SPSS نسخه 20 انجام شد. یافته ها: طبق نتایج به دست آمده میانگین پارامترهای اسپیرومتری در گروه مواجهه یافته (53/10 ± 62/89 = FEV1) پایین تر از گروه مواجهه نیافته (92/8 ± 32/97 = FEV1) بود. در حالی که میانگین آنزیم های کبدی در گروه کارگران مواجهه یافته (49/9 ± 56/29 = SGOTو 5/17 ± 67/38 =SGPT) بالاتر از گروه مواجهه نیافته (38/6 ± 5/17 = SGOTو 8 ± 11/21 =SGPT) بود. نتیجه گیری: مواجهه با BTEXها در دراز مدت منجر به کاهش ظرفیت تنفسی و افزایش آنزیم های کبدی می شود. بنابراین با کنترل های مهندسی و مدیریتی مناسب و معاینات دوره ای از بروز چنین مشکلاتی در کارگران می توان پیشگیری نمود.}, keywords_fa = {حلال آلی, BTEX, مواجهه, اسپیرومتری, آنزیم کبدی}, doi = {10.21859/johe-03023}, url = {http://johe.umsha.ac.ir/article-1-175-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-175-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Moradpour, Zahra and Farhadi, Sajjad and Alimohammadi, Sadaf and Shirian, Maryam and Hesam, Ghasem}, title = {Assessing the explosive dust concentration and explosion risk in Shahroud high-risk industries}, abstract ={Introduction: Flammable dust particles when dispersed in air under certain conditions there is a risk of explosion. The aim of this study is determine the concentration of explosive dust, and the explosion risk assessment, in some a high risk industries of shahroud. Methods: To determine the level of dust in factories investigated, sampling and determine the concentration based on the method NIOSH 0500 was done. Then to evaluate the igniter risk, risk assessment using Failure Mode Effects Analysis (FMEA) was conducted. The main sources of possible secondary explosion were determined by observation and interviews with managers and supervisors. Results: Results of the survey the concentration of explosive dust in industries showed the most explosive dust generation, was related to the PVC industry with a concentration of 43 ± 74 mg per cubic meter. FMEA risk assessments results also showed that the cargo handling equipment, drying, cutting and drilling equipment, motors and switchgear lightning’s, are the most risky equipment in creating sparks and ignition. Also the study showed, silos with their high storage capacity can be the most likely sources of secondary explosions. Conclusion: This study showed that concentration of explosive dust to a minimum explosive concentration is very low. But given the vast resources and great sources of ignition powder storage products that exist, pay attention to dust explosions in some of these industries is very important.}, Keywords = {explosive dust, FMEA risk assessment}, volume = {3}, Number = {2}, pages = {27-32}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی غلظت گردوغبار قابل انفجار و ارزیابی خطر انفجار در برخی از صنایع با ریسک بالای شاهرود}, abstract_fa ={مقدمه: گردوغبار قابل اشتعال ذرات ریزی هستند که وقتی در هوا تحت شرایط خاصی پراکنده می‌شوند خطر انفجار را به همراه دارند. هدف از این مطالعه بررسی غلظت گردوغبار قابل انفجار و ارزیابی خطر انفجار در برخی از صنایع با ریسک بالای شاهرود می‌باشد. روش بررسی: در ابتدا جهت بررسی غلظت گردوغبار در کارخانجات مورد بررسی، با اقتباس از متد NIOSH 0500، نمونه‌برداری و تعیین غلظت انجام شد. سپس جهت بررسی ریسک جرقه‌زنی، ارزیابی ریسک به روش تجزیه و تحلیل حالات خطر و اثرات ناشی از آن (FMEA) صورت پذیرفت. همچنین منابع اصلی احتمالی انفجار ثانویه نیز توسط مشاهده و مصاحبه با مدیران و سرپرستان مشخص شد. یافته‌ها: نتایج بررسی غلظت گردوغبار قابل انفجار در بین صنایع مورد بررسی نشان داد بیشترین تولید گردوغبار مربوط به صنایع PVC با غلظت 43±74 میلی‌گرم بر مترمکعب می‌باشد. نتایج ارزیابی ریسک FMEA نیز نشان داد تجهیزات انتقال مواد، خشک‌کن‌ها، تجهیزات برشکاری و سوراخکاری، موتورها و تابلو برق‌ها از پرریسکترین تجهیزات در ایجاد جرقه و اشتعال می‌باشند. همچنین بررسی‌ها نشان داد، سیلوها با ظرفیت نگهداری بالایی که دارند می‌توانند مهمترین منابع احتمالی انفجار ثانویه باشند. نتیجه‌گیری: نتایج این مطالعه نشان داد غلظت گردوغبار قابل انفجار نسبت به حداقل غلظت قابل انفجار بسیار پایین می‌باشد ولی با توجه به منابع وسیع جرقه زنی و منابع بزرگ ذخیره‌سازی محصولات پودری که وجود دارد، توجه به انفجار گردوغبار در برخی از این صنایع، بسیار حائز اهمیت می‌باشد. }, keywords_fa = {گردوغبار قابل انفجار, ارزیابی ریسک FMEA}, doi = {10.21859/johe-03024}, url = {http://johe.umsha.ac.ir/article-1-183-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-183-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Moradi, Abbas and Haidari, Rashid and Motamedzade, Majid and Faradmal, Javad and Babamiri, Mohamm}, title = {Ergonomics intervention to reduce musculoskeletal disorders: case study in cement company production}, abstract ={Introduction:Musculoskeletal Disorders (MSDs) are one of the most important factors occupational injuries and disabilities in workplaces. The aim of the persent study was ergonomics intervention to reducemusculoskeletal disorders. Methods: This interventional study was conduct on 126 preservation and maintenance  workers in cement company by classfication sampling. The Nordic Musculoskeletal Disorders Questionnaire, QEC and Ergonomics Checkpoint methods were used to collected data before and after the interventions. The interventional program include practical and easy to implment solutions for improvement safety,health and work conditions, workers trainig, selective and corrective exer Data  were analyzed by Mcnemar test using SPSS_22 software. Result: Data analysis showed  significant differences(P_value<0.001) between prevalnce of disorders during one week before interventions.  for lower back,back and were 62.70%, 60.32% and after intervention were reduce  to 46.03% and 43.65%. Conclusion: Acoording  to QEC method, 83 maintenance  workers ( 65.87%) were at high risk  and prevalence  of lower back and knee was high that applying of  simple  and inexpensive solutions, participatory solutions of Ergonomics Checkpoint andselective corrective exerciselead to  musculoskeletal disorders reduction.}, Keywords = {Ergonomics intrventions, Musculoskeletal Disorders, Ergomomics Checkpoint, participatory}, volume = {3}, Number = {2}, pages = {33-40}, publisher = {Hamedan University of Medical Sciences}, title_fa = {مداخلات ارگو نومی به منظور کاهش ناراحتی های اسکلتی - عضلانی : مطالعه موردی در یک شرکت تولید سیمان}, abstract_fa ={مقدمه: اختلالات اسکلتی - عضلانی از مهمترین عوامل آسییب زای شغلی و ناتوان کننده در محیط کار می باشد. هدف از انجام این مطالعه، مداخله ارگو نومیک به منظور کاهش این ناراحتی ها می باشد. روش بررسی: این مطالعه مداخله ای بر روی 126 نفر از کارگران واحدهای تعمیر و نگهداری یک شرکت تولید سیمان به روش نمونه گیری طبقه ای انجام پذیرفت.به منظور جمع آوری داده ها قبل و بعد از مداخله، از پرسشنامه نوردیک، روش QEC و چک پوینت نکات بازبینی ارگونومی استفاده شد. ،مداخلات با اجرای راه حل های ساده و عملی،آموزش و انجام حرکات اصلاحی منتخب صورت گرفت.داده های جمع آوری شده با آزمون مک نمارتوسط نرم افزار SPSS-22  تجزیه و تحلیل شدند . یافته ها: آنالیز داده ها تفاوت معنی داری در شیوع اختلالات طی یک هفته  قبل و بعد از مداخله نشان داد ( P-value<0.001). بطوری که شیوع اختلالات طی هفته گذشته قبل از مطالعه در نواحی کمر، زانو،  به ترتیب  62.70٪ و60.32 ٪ و بعد  از مداخله به 46.03٪ و 43.65٪ کاهش یافت. نتیجه گیری: طبق روش QEC (65.87%) از تعمیر کاران صنعت سیمان ، در سطح ریسک بالا بودند و ناراحتی های کمر و زانو از شیوع الایی برخوردار بود.که کاربرد راه حل های ساده، کم هزینه و مشارکتی نکات بازبینی ارگونومی همراه با حرکات اصلاحی منتخب منجر به کاهش قابل توجه این ناراحتی ها گردید.}, keywords_fa = {مداخلات ارگو نمی, اختلالات اسکلتی ـ عضلانی, نکات بازبینی ارگو نومی, مشارکت}, doi = {10.21859/johe-03025}, url = {http://johe.umsha.ac.ir/article-1-169-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-169-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {KarimiZeverdegani, Sara and Bahrami, Abdulrahman and Rismanchian, Masoud and GhorbaniShahna, Farshi}, title = {Developed a needle trap device with PDMS sorbent for microextraction of toluene and methyl ethyl ketone from aquatic samples using dynamic headspace}, abstract ={Introduction: Due to the widespread use of toxic chemicals in most workplaces that can lead to toxic effects on human, various chemical extraction technique have been defined for analysis these toxic substances in air, water and biological samples. The purpose of this research is extraction of  toluene and methyl ethyl ketone from aquatic samples with needle trap device and  one commercial sorbent. Methods: In this research, needle trap device was used to extraction of  toluene and methyl ethyl ketone in aquatic samples, so needles(size 20) were packed with PDMS and extraction was done with dynamic headspace needle trap device. Gas chromatography with - flame ionization detector was used to analysis and optimized extraction of two substances were obtained. Results: Results show that the optimum temperature and time extraction was similar for toluene and methyl ethyl ketone (30 ° C, 30 min), but the reproducibility of results and calibration curve that obtained for toluene was better than methyl ethyl ketone. Conclusion: Needle trap technique is inexpensive, sensitive and portable also this method has good recovery to extract small amounts of  toluene and methyl ethyketon from aquatic samples with polydimethylsiloxane.}, Keywords = {Needle trap device, Polydimethylsiloxane, Gas chromatograph}, volume = {3}, Number = {2}, pages = {41-46}, publisher = {Hamedan University of Medical Sciences}, title_fa = {طراحی و توسعه یک تله سوزنی مبتنی بر جاذب PDMS جهت ریزاستخراج تولوئن و متیل اتیل کتون از نمونه های آبی به روش فضای فوقانی دینامیک}, abstract_fa ={مقدمه: با توجه به استفاده گسترده مواد شیمیایی در اغلب محیط های کاری و عوارض ناشی از مواجهه با آن ها، روش های مختلفی به استخراج این  مواد  در نمونه های هوا، آب و نمونه های بیولوژیکی پرداخته است. دراین تحقیق هدف بررسی استخراج تولوئن و متیل اتیل کتون  از نمونه های آبی با استفاده از روش تله سوزنی  همراه با  یک جاذب تجاری بود. روش بررسی: در این مطالعه به منظور استخراج تولوئن و متیل اتیل کتون از نمونه های آبی سوزن هایی با اندازه 20  با جاذب پلی دی متیل سیلوکسان پر شد و استخراج آنالیت ها از بخارات فضای فوقانی ویال به صورت دینامیک انجام گرفت. آنالیز آنالیت های استخراج شده با استفاده از دستگاه گازکروماتوگراف مجهز به آشکارساز یونی شعله ای انجام گرفت و پارامترهای شرایط بهینه استخراج دو ماده بررسی گردید. یافته ها: نتایج تحقیق حاکی از این بود که دما و زمان بهینه استخراج برای دو ماده مشابه بوده(30 درجه سانتی گراد و 30 دقیقه) اما تکرارپذیری نتایج و منحنی کالیبراسیون به دست آمده در خصوص آنالیز تولوئن بهتر از نتایج مربوط به  متیل اتیل کتون بوده است. نتیجه گیری: روش ریزاستخراج با تله سوزنی به روش فضای فوقانی دینامیک مقرون به صرفه و حساس بوده،  تجهیزات ساده ای داشته و از کارایی لازم جهت ریزاستخراج مقادیر کم آنالیت از نمونه های آبی برخوردار می باشد. روش مورد نظر در این تحقیق به منظور استخراج دو ماده سمی با استفاده از پلی دی متیل سیلوکسان نتایج مناسبی به همراه داشت.}, keywords_fa = {به دام اندازی توسط سوزن, پلی دی متیل سیلکسین, گازکروماتوگراف }, doi = {10.21859/johe-03026}, url = {http://johe.umsha.ac.ir/article-1-200-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-200-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Tirgar, Aram and Samaei, Seyed Ehs}, title = {Systematic analysis of a decade of occupational health research in Iran}, abstract ={Introduction: In view of the increasing attention to the health of the workforce and the other hand the increase in scientific outputs in format of scientific and research papers, the aim of this study was to monitor the status of technical articles of Iranian journals in the field of health workforce. Methods: This retrospective cross-sectional study was conducted for a period of ten years (2005-2015) in the specialized field occupational health journals. The data based on content analysis method with researcher-made checklist and using by census articles were collected. Results: the extracted data, from 927 article from 5 specialized journals in period of ten years, was represent the growing trend in publication of Persian and English articles. Most research had been done respectively in physical and mental health scope. According to the type of harmful factors, Ergonomic factors with 24.27 percent, has been allocated to itself the largest portion of articles and research. Only 11.54 percent of reviewed articles was interventional studies. Also, cohort studies was not found among articles. Conclusion: The findings of this study which is the Scientometrics type, represent the imbalance in health workforce researches. So that hazardous agents such as ergonomic factors is strong emphasis and some health aspects such as public health is neglected. According to current situation, setting national priorities in order to balance the distribution of health force researches is necessary.}, Keywords = {Scientometrics, Content Analysis, Scientific output, Occupational health.}, volume = {3}, Number = {2}, pages = {47-55}, publisher = {Hamedan University of Medical Sciences}, title_fa = {تجزیه و تحلیل نظام مند یک دهه پژوهش های حوزه سلامت کار در ایران}, abstract_fa ={مقدمه: نظر به توجه روزافزون به سلامت نیروی‌کار و از سویی افزایش تولیدات علمی در قالب  مقالات علمی پژوهشی، هدف از این تحقیق تجزیه و تحلیل نظامند پژوهش‌ها در حوزه سلامت نیروی کار در مجلات علمی کشور بوده‌است. روش بررسی: این مطالعه بصورت مقطعی و گذشته نگر برای دوره‌ای ده ساله از سال 1384 تا 1393 در میان مجلات تخصصی حوزه سلامت نیروهای کار و بهداشت حرفه‌ای انجام پذیرفت. داده ها با استفاده شیوه تحلیل محتوا، به کمک چک لیست محقق ساخته و از طریق تمام شماری مقالات گردآوری گردید. یافته‌ها: داده‌های حاصل از استخراج 927 مقاله از 5 نشریه تخصصی طی دوره ای ده ساله گویای روند روبه رشد انتشار مقالات فارسی و انگلیسی بود. اکثر پژوهش ها در خصوص سلامت جسمی و پس از آن پیرامون سلامت روانی به اجرا در آمده بودند. از نظر عوامل زیان‌‌آور، عوامل ارگونومیک با نسبت 27/24 درصد بیشترین سهم مقالات و پژوهش ها را به خود اختصاص داد. تنها 54/11درصد از مقالات مورد بررسی از نوع مداخله‌ای  بود و نشانی از مطالعات همگروهی یا کوهورت در مقالات یافت نشد. نتیجه‌گیری: یافته های این مطالعه که از نوع علم سنجی است، از عدم توازن پژوهش ها در حوزه سلامت نیروی کار حکایت دارد. بگونه ای که برخی عوامل زیان آور مانند عوامل ارگونومیک مورد تاکید بسیار و بعضی از ابعاد سلامت مانند سلامت اجتماعی مورد غفلت قرار گرفته است. با توجه به وضعیت موجود، تعیین اولویت های کشوری به منظور توزیع متعادل پژوهش در زمینه سلامت نیروهای کار لازم به نظر می رسد.}, keywords_fa = {علم سنجی, تحلیل محتوا, برونداد علمی, بهداشت حرفه ای.}, doi = {10.21859/johe-03027}, url = {http://johe.umsha.ac.ir/article-1-218-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-218-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Deyhim, Sajjad and Babaei, Morteza and Motamedzade, Maji}, title = {Ergonomic evaluation of pressurized irrigation equipment factotry operators using an easy posture assessment}, abstract ={introduction: One of the most common causes of occupational injuries in industrialized and developing countries is musculoskeletal disorders Determining the risk factors of musculoskeletal disorders can be helpful choosing the right method for interventions and detailed studies. This study aimed to evaluate the ergonomic risk factors in operators of pressurized irrigation equipment factory. Materials and Methods: This cross-sectional study was conducted in a pressurized irrigation equipment manufacturing company. In this study, a new method based on observation was used to evaluate the ergonomic aspects of operator's activity. In order to assign tasks and sub-tasks, direct observation and video recording equipment were used. Ergonomic assessment was carried out on all sub-tasks identified. then, the criticality of the task determined. Results: Among the tasks identified 53 very critical posture 61 critical and 82 low critical posture was determined. Ergonomic point in the ball valve production line was 0.6 and 0.68 respectively for tow operator. For drop valve and automatic valve production line's ergonomic point was 0.52 and 0.67 respectively. Conclusion: According to the results, posture analysis method used in this study is easy and accurate. The advantage of this method is 14 ergonomic domaines that covered whole body and time fragment of each task. Findings of previous studies showed good correlation between results from this method and OCRA method. In this study, The most critical posture was related to operator's wrist, so it is recommended that control measures on wrist posture correction should be considered.}, Keywords = {keywords: musculoskeletal disorders,ergonomic risk factors, Critical posture}, volume = {3}, Number = {2}, pages = {56-63}, publisher = {Hamedan University of Medical Sciences}, title_fa = {ارزیابی وظایف اپراتوری در اپراتورهای تولید تجهیزات آبیاری تحت‌فشار با استفاده از یک روش ارزیابی پوسچر آسان}, abstract_fa ={مقدمه: اختلالات اسکلتی_عضلانی یکی از عوامل شایع آسیب‌های شغلی و حرفه‌ای در کشورهای صنعتی و درحال‌توسعه است. تعیین عوامل خطر می‌تواند در انتخاب روش مناسب برای بررسی‌های دقیق‌تر و انجام مداخلات نقش مهمی داشته باشد. این مطالعه باهدف ارزیابی ریسک فاکتورهای ارگونومیک اپراتورهای تجهیزات آبیاری تحت‌فشار انجام‌ شد. روش کار: این مطالعه به‌صورت مقطعی در یک شرکت تولید تجهیزات آبیاری تحت‌فشار انجام شد. در این مطالعه از روشی جدید و مبتنی بر مشاهده برای ارزیابی ارگونومیک فعالیت اپراتورها استفاده شد. به‌منظور تعیین وظایف و زیر وظایف از تجهیزات ضبط ویدیویی و مشاهده مستقیم استفاده شد سپس ارزیابی ارگونومیک موردنظر برای تمام زیر وظایف شناسایی‌شده، انجام شد. درنهایت میزان بحرانی بودن وظیفه مشخص شد. یافته ها: درمجموع از وظایف شناسایی‌شده 53 پوسچر بحرانی شدید، 61 پوسچر بحرانی متوسط و 82 پوسچر بحرانی کم تعیین شد. امتیاز ارگونومیک کل برای وظایف اپراتورهای خط تولید شیر توپی به ترتیب 0.6 و 0.68 و برای خط تولید شیر قطره‌ای و شیر خودکار به ترتیب 0.52 و 0.67 به دست آمد. نتیجه‌گیری: با توجه به نتایج به‌دست‌آمده، روش ارزیابی پوسچر مورداستفاده در این مطالعه روشی آسان و دقیق است. مزیت این روش وسعت محدوده‌های ارگونومیک موردبررسی است که شامل 14 محدوده است. یافته‌های مطالعات قبلی همبستگی معنی‌داری رابین نتایج حاصل از این روش و روش OCRA نشان داده‌اند.بیشترین پوسچر بحرانی مربوط به مچ اپراتورها بوده است؛ بنابراین توصیه می‌شود اقدام کنترلی بر تصحیح پوسچر مچ متمرکز شود.}, keywords_fa = {واژگان کلیدی: اختلالات اسکلتی_عضلانی, ریسک فاکتورهای ارگونومیک, پوسچر بحرانی}, doi = {10.21859/johe-03028}, url = {http://johe.umsha.ac.ir/article-1-193-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-193-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Dehghan, Habibollah and Gharib, Seyfullah}, title = {The effect of noise exposure on heart rate in the hot and humid conditions in climatic chamber}, abstract ={Introduction: In some jobs, physical activity can be done in high noise pollution that can affect the heart rate. The aim of this study was to investigate the effects of noise exposure and physical activity on heart rate in the hot and humid conditions. Materials and Methods:  This experimental study was performed on 14 healthy men in hot and humid climatic chamber (35 °C, 75% RH). Heart rate was measured at rest, sitting, low workload, moderate workload and heavy workload in non- noise exposure trial and noise exposure trials in levels of 65, 75, 85 and 95(dBA). Results: In hot and humid weather conditions. In the sitting, low workload, moderate workload and heavy workload  situations  heart rate average was significantly between non- exposure to noise and noise exposure at level of 65, 75, 85 and 95 dB (A) (P <0.05). In all activity levels heart rates increased with increasing sound intensity significantly. Heart rate increased in noise more than the tthreshold limit value in moderate and heavy workload was more than low workload. Conclusion: According to the additive effects noise exposure on heart rate in the hot and humid conditions, workload  level are considered a higher level in the hot and humid compared with thermal comfort conditions  if exposure to noise over 85 dBA.}, Keywords = {Noise, Workload, Heart Rate, Hot and Humid conditions}, volume = {3}, Number = {3}, pages = {1-8}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی تاثیر مواجهه با صدا بر ضربان قلب افراد در شرایط آب و هوایی گرم و مرطوب در اتاقک شرایط جوی}, abstract_fa ={مقدمه: در برخی از مشاغل ، فعالیت های بدنی در شرایط با آلودگی صدا بالا انجام  می شود که می تواند بر روی ضربان قلب  تاثیر بگذارد. هدف این مطالعه، بررسی اثر  صدا و فعالیت بدنی بر روی تغییرات ضربان قلب در شرایط گرم و مرطوب بود. روش بررسی: این مطالعه آزمایشگاهی بر روی 14 مرد سالم در اتاقک شرایط جوی گرم و مرطوب (دمای  35  و رطوبت 75%) انجام گرفت. ضربان قلب در حالت استراحت، نشسته، فعالیت سبک، فعالیت متوسط و فعالیت سنگین درشرایط بدون مواجهه با صدا و در مواجهه با تراز های 65 ، 75 ، 85 و  95 دسی بل اندازه گیری شد. یافته ها: در شرایط جوی گرم و مرطوب ، میانگین ضربان قلب در وضعیت نشسته، کار سبک ، کار متوسط و کار سنگین  و در مواجهه با تراز صدای 65، 75، 85  و 95 دسی بل با تعداد ضربان قلب در حالت بدون مواجهه با صدا معنی دار بود (P<0.05) در تمام سطوح فعالیت با افزایش شدت صدا ، ضربان قلب نیز افزایش معنی دار  داشت(P<0.05)  میزان افزایش ضربان قلب در  مواجهه با صدای بیشتر از حد مجاز (85 دسی بل) در فعالیت های بدنی متوسط و سنگین بیشتر بود . نتیجه گیری: بر اساس داده ای این مطالعه با توجه به اثر افزایشی توام شدن مواجهه با صدا  و شرایط گرم و مرطوب بر روی ضربان قلب،  توصیه می شود  در شرایط گرم و مرطوب در مقایسه با شرایط اسایش دمایی ، سطح بار کاری جسمانی افراد،  چنانچه در مواجهه با صدای بیشتر از 85 دسی بل قرار دارند یک رده بالاتر در نظر گرفته شود.}, keywords_fa = {صدا, بار کاری, ضربان قلب, شرایط گرم و مرطوب}, doi = {10.21859/johe-03034}, url = {http://johe.umsha.ac.ir/article-1-237-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-237-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Mahmoudi, Shahram and Nassiri, Parvin and Mohammadfam, Iraj}, title = {Representation a Framwork for Contractors Selection Via of Health, Safety and Environment}, abstract ={Introduction: Quality and efficiency of health, safety, and environment (HSE) management systems play a vital role in achieving their goals. Considering outputs and objective achievement make continuous improvement of services and products, internal and external customer satisfaction, adopting a systematic way for performing various tasks, system performance and analysis very important. The present study was conducted to construct a proper framework for assessing MAPNA group contractors in terms of their health, safety, and environment performance.  . Method: In the first step of the study, all documents and literature associated with performance assessment were reviewed. In the second step, using a focus group approach, a basic model for assessing HSE management system was designed. Lastly, the framework was tested and credited on three major contractors of MAPNA group. Results: The proposed framework was composed of five criteria. The main criteria was the pattern of HSE process implementation which had seven sub-criteria and 120 guiding hints. Moreover, the five criteria were able to assess the organizational capabilities in terms of health, safety, and environment management.. Conclusion: The proposed framework make contractors able to promote their HSE performances by identifying organizational strong and weak points, prioritizing improvement projects, and also monitoring the pace of improvement in achieving organizational excellence..}, Keywords = {Performance, Framework, Contractor, Health, Environment}, volume = {3}, Number = {3}, pages = {9-15}, publisher = {Hamedan University of Medical Sciences}, title_fa = {ارائه الگویی برای انتخاب پیمانکاران از دیدگاه HSE}, abstract_fa ={مقدمه: کیفیت و اثر بخشی سیستم های مدیریت بهداشت، ایمنی و محیط زیست، عامل حیاتی در تحقق اهداف آنها است. توجه به نتایج و تحقق اهداف، بهبود مستمر کیفیت خدمات و محصولاتی که سیستم ارایه می‌کند، تأمین رضایت مشتریان داخلی و خارجی و انجام هدفمند امور، توجه به عملکرد سیستم و ارزیابی آنرا الزامی می‌سازد. مطالعه حاضر در پاسخ به نیاز روزافزون گروه مپنا برای به کارگیری شیوه ای علمی به منظور ارزیابی پیمانکاران خود از دیدگاه بهداشتی، ایمنی و زیست محیطی و نیاز به آگاهی از کارایی و اثربخشی سیستم ها و نیاز سازمان در آگاهی از جایگاه پیمانکاران خود در حوزه HSE توسعه یافته است. روش بررسی: در این مطالعه ابتدا به منظور طراحی ابزار مناسب ارزیابی عملکرد، مهمترین روشها و الگوهای ارزیابی عملکرد مورد بررسی قرار گرفتند. سپس با بهره گیری از روش Focud Group مدل اولیه ارزیابی عملکرد سیستم مدیریت HSE طراحی شد. در نهایت مدل پیشنهادی در میان سه پیمانکار اصلی گروه مپنا مورد تست و تصدیق قرار گرفت. یافته ها: الگوی پیشنهادی از 5 معیار تشکیل شد. مهمترین معیار الگو پیاده سازی فرآیند HSE بود که دارای 7 زیر معیار و 120 نکته راهنما بود. معیارهای منتخب همزمان نتایج و توانمندسازهای سازمان در حوزه مدیریت ایمنی، بهداشت و محیط زیست را پوشش می دهند. نتیجه گیری: الگوی پیشنهادی با شناسایی نقاط قوت و ضعف سازمان در زمینه HSE و اولویت بندی پروژه‌های بهبود و همچنین نظارت بر روند و سرعت بهبود در مسیر تعالی سازمانی، امکان ارتقاء شاخص های HSE سازمانها را فراهم می آورد.}, keywords_fa = {عملکرد, الگو, پیمانکار, بهداشت, محیط زیست}, doi = {10.21859/johe-03036}, url = {http://johe.umsha.ac.ir/article-1-233-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-233-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Bolghanabadi, Somayeh and Pour, Mehdi and Mohamadi, Ali akbar and Tizro, Mahdi}, title = {The Relation between Heat strain and hydration status among}, abstract ={Introduction: during the physical activity in hot environments, sweating with evaporation, the important physiological response of the body  increases which can be lead to dehydration . Long-term water shortages could adversely affect vital organs. The aim of this study was to determine heat stress and dehydration status of workers in hot workplaces. Methods: This cross sectional study was done on 90 workers of workers in sugar factory which were exposed to heat. Heart rate and oral temperature were respectively measured using a heart rate meter and an oral thermometer. WBGT index was recorded and the HSSI questionnaire was completed simultaneously, in order to assess dehydration level was measured of refractometer. Data obtained from this study were analyzed using compare means and t-test, paired t-test tests by SPSS 20 software Results: Heat stress exceeded the national and international recommended limits based on the WBGT index in 44% of cases of workstations. According to this study, 8.5% of our population had some degree of dehydration.63.4% of them were significantly dehydrated (urine SG>1.020) and 28% of them were severely dehydrated (urine SG>1.030) and the mean specific gravity was 1.025±0.043 The correlations between heat strains, Urine Density and heat stress including oral temperature, heart rate were significant(p<0.05). Conclusion: A high percentage of the study population had some degree of dehydration that based on the results is worrying. It seems that planning in order to control of heat stresses by replace drinking is necessary.}, Keywords = {WBGT index, HSSI index, Urine Density, dehydration, Hot Workplace}, volume = {3}, Number = {3}, pages = {16-23}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی ارتباط سطح استرین حرارتی و میزان دهیدراسیون در کارگران کارخانه قند}, abstract_fa ={مقدمه: هنگام انجام فعالیت فیزیکی در محیط های گرم، تعریق همراه تبخیر مهمترین پاسخ فیزیولوژیک بدن، افزایش می یابد که می تواند منجر به دهیدراسیون شود. کمبود آب می تواند در دراز مدت اثرات نامطلوبی بر اندام های حیاتی بدن بگذارد. هدف از این مطالعه تعیین استرس گرمایی و بررسی وضعیت دهیدراسیون در کارگران شاغل در محیط های گرم بود. روش بررسی: این مطالعه توصیفی تحلیلی روی 90 نفر از کارکنان شاغل در کارخانه قند که در مواجهه با گرما بودند بصورت تصادفی انتخاب شدند. ضربان قلب و دمای دهانی با استفاده از ضربان سنج قلب و دماسنج دهانی سنجیده شد، شاخص WBGT و پرسشنامه HSSI تکمیل، وضعیت دهیدراسیون توسط رفلکتومتر سنجیده شد. داده ها با استفاده از آزمون های آمارtest  t-و paired t-test و  chi-square توسط نرم افزار SPSS نسخه 20 مورد تحلیل قرار گرفت. یافته ها: میزان تنش گرمایی شاغلین بر مبنای شاخص WBGT، در 44/5 موارد از حد مجاز توصیه شده (27/5) بالاتر شد، بر اساس حدود توصیه شده دهیدراسیون، 8/5 درصد افراد درجاتی از کم آبی و حدود 4/63 درصد آنها کاملا دچار دهیدراسیون و 28 درصد افراد از کل افراد دچار دهیدراسیون شدید هستند. میانگین وزن مخصوص ادرار با رفلکتومتر   0/043±1/025 بود. بین دمای زیرزبانی، ضربان قلب با وزن مخصوص ادرار،  شاخص تنش گرمایی و استرین گرمایی رابطه معنی دار وجود دارد(0/05 > P). نتیجه گیری: درصد بالایی از جمعیت مورد مطالعه درجاتی از دهیدراسیون را داشتند که بر اساس این نتایج نگران کننده می باشد. برنامه ریزی در جهت آموزش و تعیین رژیم مصرف مایعات جایگزین ضروری می باشد.}, keywords_fa = {شاخص WBGT, شاخص HSSI, دانسیته ادراری, دهیدراسیون, محیط کاری گرم}, doi = {10.21859/johe-03032}, url = {http://johe.umsha.ac.ir/article-1-242-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-242-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {CharkhandazYeganeh, Reza and Alimohammadi, Iraj and Abolghasemi, Jamileh and Damiri, Zabiolah and Parsazadeh, Bahar and Rahmani, Negar}, title = {Validity and reliability of Verbal Online Subjective Opinion (VOSO) and Modified Cooper-Harper scales in measuring of mental workload}, abstract ={Introduction: High mental workload is one of the important factors that results in errors in safety and occupational health scope and its measurement has high importance. So, this study aimed to determine validity and reliability of Verbal Online Subjective Opinion (VOSO) and Modified Cooper-Harper (MCH) scales in measuring mental workload. Methods: This study was conducted on 90 male students of Iran University of Medical Sciences. In this study, the Forward-Backward translation was used for translation of scales. Moreover, Content Validity Ratio (CVR) and Content Validity Index (CVI) were calculated by having suggestion of 6 Ergonomics and Occupational health experts. The Hybrid Memory Search Task software was used to create mental workload. Convergent validity of scales was calculated using correlation of scales with reaction time and then Test-Retest method was used to determine the reliability of scales. Results: Content and convergent validity of scales were confirmed and correlation of both scales with reaction time were higher than 0.8. Moreover for determination of scales reliabilities, Pearson correlation coefficient between scales values in test and retest trials were 0.86 and 0.91 for VOSO and MCH respectively. Conclusion: It seems that in regard to confirmation of validity and reliability of VOSO and MCH in this study and their high correlation with reaction time, it can use these scales in measurement of mental workload.}, Keywords = {Mental workload, Verbal Online Subjective Opinion scale, Modified Cooper-Harper scale}, volume = {3}, Number = {3}, pages = {24-31}, publisher = {Hamedan University of Medical Sciences}, title_fa = {روایی و پایایی مقیاس پندار ذهنی و مقیاس اصلاح شده کوپر-هارپر در اندازه گیری بار کاری ذهنی}, abstract_fa ={مقدمه: بار کاری ذهنی بالا از عوامل مهم خطا در حوزه ایمنی و بهداشت حرفه ای بوده و اندازه گیری آن از اهمیت زیادی برخوردار است. لذا هدف از انجام این مطالعه تعیین روایی و پایایی مقیاس پندار ذهنی و مقیاس اصلاح شده کوپر-هارپر در اندازه گیری بار کاری ذهنی بود. روش بررسی: این مطالعه روی 90 دانشجوی پسر دانشگاه علوم پزشکی ایران انجام شد. برای ترجمه مقیاس ها از روش ترجمه پیش رونده-پس رونده استفاده گردید. همچنین با استفاده از نظر 6 نفر از متخصصین ارگونومی و بهداشت حرفه ای، نسبت روایی محتوا و شاخص روایی محتوا برای مقیاس ها محاسبه گردید. برای ایجاد بارکاری ذهنی از نرم افزار وظیفه جستجوی حافظه هیبریدی استفاده گردید. روایی همگرای مقیاس ها با استفاده از همبستگی مقادیر مقیاس ها با زمان واکنش، محاسبه و برای تعیین پایایی مقیاس ها نیز از روش آزمون-باز آزمون استفاده گردید. یافته ها: روایی های محتوا و همگرای مقیاس ها مورد تایید قرار گرفت و همبستگی هردو مقیاس با زمان واکنش بالاتر از 0/8 بود. برای تعیین پایایی مقیاس ها نیز مقدار ضریب همبستگی پیرسون بین مقادیر مقیاس ها در مراحل آزمون و باز آزمون برای مقیاس پندار ذهنی و مقیاس اصلاح شده کوپر-هارپر به ترتیب برابر0/86 و 0/91 به دست آمد. نتیجه گیری: باتوجه به تایید روایی و پایایی مقیاس های پندار ذهنی و اصلاح شده کوپر-هارپر در این مطالعه و همچنین همبستگی بالای آنها با زمان واکنش به نظر می­رسد بتوان از آنها در اندازه گیری بارکاری ذهنی استفاده کرد.}, keywords_fa = {بار کاری ذهنی, مقیاس پندار ذهنی, مقیاس اصلاح شده کوپر-هارپر}, doi = {10.21859/johe-03038}, url = {http://johe.umsha.ac.ir/article-1-211-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-211-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Aliabadi, Mohsen and Golmohammadi, Rostam and Oliae, Mohammad and Shahidi, Rez}, title = {Study of noise absorption characteristics for current building materials applied in industrial and office rooms}, abstract ={Introduction: In Iran country, there is a lack of reliable data on acoustic characteristics of building materials applied in the offices and industrial rooms. This study aimed to investigate noise absorption characteristics for current building and acoustics materials and provided the acoustic database. Method:  In this cross sectional study, the minimum of 60 building and acoustic materials were tested in the acoustics laboratory located in the school of health. Measuring the absorption coefficient was performed using the Impedance Tube (SW60, BSWA) along with 1/4’’ Microphone (MPA416) and power amplifier (PA50) in frequency range from 125 to 6300 Hz according to ISO10534-2. The data was analyzed using Excel 2013 software. Results: The results of the sound absorption coefficients for different types of materials were presented based on octave band. The results showed that the increase of sound absorptions by rising the thickness of the chemical foams. The highest absorptions were observed in the medium and high frequencies. However, the impact of materials density on the increase of sound absorption is inconsiderable compared with materials thickness. In view point of sound absorption, the polyurethane foams have better performance than the polyethylene foams. Conclusion: Based on the obtained acoustics database, acoustics professionals can conducted more reliable evaluation about acoustic condition of residential, industrial and office rooms in the design and operation phases. The results confirmed that, material thickness is one of the main features affecting sound absorption especially for high efficiency absorbents like chemical foam. }, Keywords = {Sound absorption coefficients, Acoustic material, Building material, Impedance tube}, volume = {3}, Number = {3}, pages = {32-39}, publisher = {Hamedan University of Medical Sciences}, title_fa = {مطالعه خصوصیات جذب صوتی مواد ساختمانی رایج در بناهای صنعتی و اداری کشور}, abstract_fa ={مقدمه: در سطح کشور اطلاعات معتبری در خصوص ارزش آکوستیکی مصالح جهت استفاده در محیط های اداری و صنعتی وجود ندارند. هدف از انجام این پژوهش مطالعه خصوصیات جذب صوتی مواد و تدوین بانک داده های آکوستیکی است. روش بررسی: در این پژوهش توصیفی مقطعی تعداد حداقل 60 نمونه از مواد ساختمانی و مواد آکوستیکی مورد آزمایش قرار گرفت. در این مطالعه جهت اندازه گیری ضریب جذب صوتی مواد از لوله امپدانس مدل SW260 شرکت BSWA مطابق با استاندارد ISO 10534 و میکروفن یک چهارم اینچ مدل MPA416 و آمپلی فایرمدل  PA50  در محدوده فرکانسی 125 الی 6300 هرتز استفاده گردید. نتایج بدست آمده با استفاده از نرم افزار Excel 2013 مورد تحلیل قرار گرفت. نتایج: نتایج اندازه گیری ضریب جذب صوتی انواع مواد و مصالح موجود در کشور بر مبنای فرکانس های یک اکتاوباند ارائه گردید. نتایج نشان داد با افزایش ضخامت فوم های پایه شیمیایی ضریب جذب صوتی افزایش می یابد. با این حال تاثیر دانسیته جاذب بر افزایش ضریب جذب در مقایسه با اثر ضخامت جاذب بسیار ناچیز است. فوم پلی یورتان در مقایسه با فوم پلی اتیلن کارایی بسیار بالاتری از لحاظ جذب صوتی داشت. نتیجه گیری: با استفاده از نتایج ارائه شده، متخصصین آکوستیک می توانند ارزیابی قابل اطمینان تری از شرایط آکوستیکی محیط های اداری و صنعتی در فاز طراحی یا بهره برداری داشته باشند. نتایج تایید نمود ضخامت ماده جاذب به عنوان یک فاکتور تعیین کننده در کارایی جذب صوت به ویژه در خصوص جاذب های با کارایی بالا از جمله فوم های پایه شیمیایی است.}, keywords_fa = {ضریب جذب صوت, مواد آکوستیکی, مواد ساختمانی, لوله امپدانس}, doi = {10.21859/johe-03031}, url = {http://johe.umsha.ac.ir/article-1-246-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-246-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Mohebian, Zohre and Mehrifar, Younes and Dehghan, Habibollah and Habibi, Ehsanollah and Yadegarfar, Ghasem}, title = {Investigating the combined effects of heat and lighting on students reaction time in laboratory condition}, abstract ={Introduction: In many workplaces there is exposure to heat and light simultaneously. This study investigated the combined effect of heat and lighting on some cognitive performance, i.e. reaction time. Methodology: the present semi-experimental study was conducted 2015 on 33 healthy students (16 girls and 17 boys) with a mean age of 22.1 in the thermal stress chamber. The reaction time parameter by the reaction time measurement device, after exposure to different heat surfaces (dry temperatures 22 °C and 37 °C) and lighting surfaces (200, 500 and 1500 lux). Data were analyzed using ANOVA test in SPSS-20. Results: The results showed that the average simple, diagnostic, two-color selective, two-sound selective reaction times and reaction time error increased after combined exposure to heat and lighting and showed a significant difference (P<0.05). The maximum score of reaction time belong to temperature of 37 c° and lighting of 1500 lux, the minimum score of reaction time belong to temperature of 22 °c and lighting of 1500 lux.}, Keywords = {Keywords: Heat, Combined Effect, Lighting, Reaction Time}, volume = {3}, Number = {3}, pages = {40-46}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی اثرات توام گرما و روشنایی بر روی زمان واکنش دانشجویان در شرایط آزمایشگاهی}, abstract_fa ={مقدمه: در بسیاری از محیط های کاری مواجهه با گرما و روشنایی به صورت توام وجود دارد این مطالعه با هدف بررسی تاثیر توام گرما و روشنایی بر روی زمان واکنش انجام شد. روش بررسی: این مطالعه نیمه تجربی در سال 1394بر روی 33 نفر از دانشجویان (16دختر و17پسر) با میانگین سنی 22/1 در اتاقک تنش حرارتی انجام شد. پارامتر زمان واکنش با استفاده از دستگاه سنجش زمان واکنش پس از 1/5 ساعت مواجهه توام با سطوح مختلف گرما (دماهای خشک c°22 و c°37 ) و سطوح مختلف روشنایی (500 ،200 و 1500 لوکس) اندازه گیری شد. داده ها با آزمون ANOVA نرم افزار 20-SPSS مورد تحلیل قرار گرفتند. یافته ها: یافته ها نشان داد که افزایش توام گرما و شدت روشنایی پس از گذشت 1/5 ساعت مواجهه، باعث اختلاف معنی دار و افزایش میانگین زمانهای واکنش ساده، تشخیصی،انتخابی دو رنگ و انتخابی دو صدا شده است (0/05˂P). نمره زمان واکنش هنگام مواجهه با دمای C°37 و شدت روشنایی 1500 لوکس دارای بیشترین مقدار و هنگام مواجهه با دمای C°22 و شدت روشنایی 1500 لوکس کمترین مقدار بود. نتیجه گیری: نتایج این مطالعه نشان داد که افزایش توام گرما و شدت روشنایی از طریق افزایش زمان واکنش و خطای زمان واکنش افراد در هنگام انجام فعالیتهای شناختی می تواند باعث کاهش عملکرد شناختی افراد شود. بنابراین در پست های کاری که نیازمند عکس العمل سریع هستند، بهینه سازی شرایط گرما و روشنایی به منظور کاهش زمان واکنش الزامیست.}, keywords_fa = {کلمات کلیدی: گرما, روشنایی, اثرات توام, زمان واکنش, عملکرد شناختی}, doi = {10.21859/johe-03035}, url = {http://johe.umsha.ac.ir/article-1-231-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-231-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Saedpanah, Keivan and Eskandary, Tahere and Moatamedzade, Maji}, title = {Study the relation between Work Ability Index and Life Style in Mechanics of Thermal power plant}, abstract ={Introduction: Maintenance of work ability and continuous effort to improve reduced work ability of employees is a major concern for managers. This study aimed to determine the level of work ability index and relation with life style in mechanics of thermal power plant. Method: A total of 60 mechanics from selected thermal power plant were included in this cross sectional study. Health promoting behaviors was tested by Promoting lifestyle questionnaire walker. Work ability was assessed by the Work Ability Index (WAI) and the final score was calculated from answers to its seven dimensions. Data was analyzed using SPSS 21 software. Results: The mean value of work ability index in this study was 34.80 ± 5.76. The WAI categories were 16.66% in "excellent", 36.6% in "good", 30 % in "moderate", and 16.66% in "poor" levels. Association between life style factors and WAI was statistically significant (P<.0.05). Lower WAI was associated with increasing the age, high work experience and lower education (p<.0.05). Conclusions: Average of work ability index in mechanics was at average level. Also there is a significant relationship between work ability indexes with life style. }, Keywords = {The ability to work, Work ability index, Lifestyle, Mechanics}, volume = {3}, Number = {3}, pages = {47-55}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی ارتباط شاخص توانایی کار با سبک زندگی در مکانیک کاران یک نیروگاه حرارتی}, abstract_fa ={مقدمه: حفظ توانایی کار و تلاش مستمر برای بهبود کاهش توانایی کار کارکنان یک نگرانی عمده برای کارفرمایان است. این مطالعه با هدف بررسی تعیین سطح شاخص توانایی کار و ارتباط آن با سبک زندگی در مکانیک کاران یک نیروگاه حرارتی صورت گرفت. روش کار: جامعه آماری مورد مطالعه شامل 60 نفر از مکانیک کاران بود که بصورت سرشماری انتخاب شدند. جهت اندازه گیری رفتارهای ارتقاء دهنده سلامت از پرسشنامه سبک زندگی ارتقا دهنده والکر استفاده شد. توانایی کار توسط پرسشنامه شاخص توانایی کار مورد ارزیابی قرار گرفت و نمره نهایی آن از پاسخ به 7 بعد این پرسشنامه تعیین شد. تحلیل داده ها با استفاده از نرم افزار21 SPSS صورت گرفت. یافته ها: میانگین شاخص توانایی کار در مطالعه حاضر 5/76 ± 34/80 محاسبه گردید. همچنین توزیع طبقه بندی شاخص توانایی کار بدین صورت بود که 16/66درصد در سطح ضعیف،  30 درصد در سطح متوسط،  36/6 درصد در سطح خوب و   16/66 درصد در سطح عالی قرار داشتند. با افزایش سن توانایی کار کاهش معناداری از خود نشان داد (0/05(P<. همچنین افرادی که از سطح تحصیلات بالاتری برخوردار بودند امتیاز شاخص توانایی کار بهتری داشتند. بین فاکتورهای مرتبط با سبک زندگی و شاخص توانایی کار ارتباط معنی داری یافت شد(0/05(P<. همچنین بین داشتن سابقه کار بالاتر و شاخص توانایی کاری پایین ارتباط معنی داری یافت شد(0/05(P<. نتیجه گیری: میانگین شاخص توانایی کار در مکانیک کاران مورد مطالعه در سطح متوسط قرار داشت. همچنین ارتباط بین شاخص توانایی کار با الگوی سبک زندگی رابطه مستقیم و معناداری داشت بطوریکه هرچقدر نمره شاخص توانایی کار بالاتر بود سبک زندگی افراد نیز بهتر بود.}, keywords_fa = {توانایی کار, شاخص توانایی کار, سبک زندگی, مکانیک کاران}, doi = {10.21859/johe-03033}, url = {http://johe.umsha.ac.ir/article-1-240-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-240-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Heydari, Meysam and Gholamnia, Reza and Khanijazani, Reza and kavousi, Amir and Soltanzadeh, Ahm}, title = {Study The role of latent variables in lost working days by Structural Equation Modeling Approach}, abstract ={Background: Based on estimations, each year about 250 million work-related injuries and many temporary or permanent disabilities occur which most are preventable. Oil and Gas industries are among industries with high incidence of injuries in the world. The aim of this study has investigated  the role and effect of different risk management variables on lost working days (LWD) in the seismic projects. Methods: This study was a retrospective, cross-sectional and systematic analysis, which was carried out on occupational accidents between 2008-2015(an 8 years period) in different seismic projects for oilfield exploration at Dana Energy (Iranian Seismic Company). The preliminary sample size of the study were 487accidents. A systems analysis approach were applied by using root case analysis (RCA) and structural equation modeling (SEM). Tools for the data analysis were included, SPSS23 and AMOS23  software. Results: The mean of lost working days (LWD), was calculated 49.57, the final model of structural equation modeling showed that latent variables of, safety and health training factor(-0.33), risk assessment factor(-0.55) and risk control factor (-0.61) as direct causes significantly affected of lost working days (LWD) in the seismic industries (p< 0.05). Conclusion: The finding of present study revealed that combination of variables affected in lost working days (LWD). Therefore,the role of these variables in accidents should be investigated and suitable programs should be considered for them.}, Keywords = {latent variables,Occupational accident, Seismic industry, Structure equation modeling}, volume = {3}, Number = {3}, pages = {56-63}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی نقش متغیرهای پنهان در روزهای کاری از دست رفته بر اساس مدل معادلات ساختاری در صنعت اکتشاف نفت}, abstract_fa ={مقدمه: سالانه حدود 250 میلیون حادثه شغلی و تعداد زیادی ناتوانی های موقت یا دائمی ناشی از آنها در جهان رخ می دهد که قسمت عمده آنها قابل پیشگیری هستند. صنایع نفت و گاز جزو پرحادثه ترین صنایع دنیا به حساب می آیند. هدف ما در این مطالعه واکاوی نقش و تاثیر گذاری متغیرهای مختلف مدیریت ریسک بر شاخص روزهای کاری از دست رفته در صنعت لرزه نگاری می باشد. روش بررسی: مطالعه به صورت  توصیفی- تحلیلی بر روی حوادث شغلی طی دوره هشت ساله در پروژه های مختلف لرزه نگاری انرژی دانا انجام شده است.حجم نمونه اولیه مورد مطالعه از طریق سرشماری 487 حادثه بود. جهت تجزیه او تحلیل حوادث رخ داده از روش Root Cause Analysis )RCA( ، و مدل سازی داده ها از مدل یابی معادلات ساختاری (AMOS) استفاده شد. از نرم افزارهای SPSS23 و AMOS23 برای مدل سازی و تحلیل استفاده شد.  یافته‌ها: میانگین شاخص روزهای کاری از دست رفته 49/57 روز بوده است.مدل نهایی به دست آمده از مدل یابی معادلات ساختاری نشان داد متغیرهای پنهان آموزش ایمنی (0/33-)، ارزیابی (0/55-) و کنترل ریسک (0/61-) به عنوان علل های مستقیم به طور معنی داری بر شاخص روزهای کاری از دست رفته در صنعت لرزه نگاری تاثیرگذار میباشد. نتیجه‌گیری: با توجه به یافته های پژوهش متغییرها و مولفه های قابل رد یابی مختلفی روی شاخص روزهای کاری از دست رفته در صنعت نفت تاثیرگذار می باشد. بنابراین خوب است که نقش این متغییرها در وقوع حوادث بررسی گردد و  برنامه ریزی مناسبی جهت پیشگیری از وقوع حوادث اتخاذ گردد. }, keywords_fa = {متغییرهای پنهان, حوادث شغلی, صنعت لرزه نگاری, مدل معادلات ساختاری}, doi = {10.21859/johe-03037}, url = {http://johe.umsha.ac.ir/article-1-215-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-215-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2016} } @article{ author = {Yari, Peyman and Yarahmadi, Rasoul and Khosravi, Yahya and Asivnd, Ehs}, title = {Present of occupational accidents dimensions based on risk-injury affinity groups (case study, from1384 to 1393)}, abstract ={Background and aim: correspondence analysis method as the best method to optimize matrix functions that using the risk-injury matrix methods are analyzed. This method reduces the information contained in the risk-injury table and to determine the correlation between the variables in the matrix. The aim of this study is to present accidents and occupational hazards dimensions is dependent to risk-injury groups, using occupational accidents that can be managed. Method: in this study the reports of occupational accidents registered in the social security organization in a period of ten years from the beginning of 1384 until the end of 1393 ( 222,300 incidents) were collected and type of Risk and injury related to any accident identified based on criteria, the International Labour Organization and classified in a risk-injury matrix (18 × 18). Using correspondence analysis of dimensions are identified individually, this dimensions Most indicate the most correlation between risk and injury that facilitate decision-making in the risk assessment companies are covered by Social Security.  Results: Hair criteria recommends dimensions with inertia higher than 0.2 are suitable for the study and interpretation of results, based on this study were obtained from the dimensions of inertia (eigenvalue) greater than 0.2 include the dim1 ,dim2 ,dim3 to consider and the correlation between variables is obtained based on singular value (variable distance from the centeroid). (Singular value of dim1: 0.750, singular value of dimension 2: 0.647 and singular value dimension3: 0.521)}, Keywords = {correspondence analysis, injury-risk matrix, risk, injury, occupational accidents}, volume = {3}, Number = {4}, pages = {1-9}, publisher = {Hamedan University of Medical Sciences}, title_fa = {ارائه ابعاد حوادث شغلی براساس وابستگی گروه های ریسک و آسیب(مطالعه موردی طی سالهای 1384 تا 1393 )}, abstract_fa ={زمینه و هدف: روش تحلیل تناظر به عنوان مناسب‌ترین روش برای بهینه سازی توابع ماتریس می باشد که با استفاده از این روش ماتریس ریسک-آسیب مورد تجزیه و تحلیل قرار می گیرد. این روش موجب کاهش اطلاعات موجود در جدول ریسک-آسیب و تعیین میزان همبستگی بین متغیرها در ماتریس می شود. هدف این مطالعه ارائه ابعاد حوادث و مخاطرات شغلی براساس وابستگی گروه های ریسک-آسیب می باشد، که با استفاده از آن می توان حوادث شغلی را مدیریت کرد. روش: در این مطالعه گزارش های حوادث شغلی ثبت شده در سازمان تامین اجتماعی در یک دوره زمانی ده ساله از ابتدای  سال 1384 تا پایان سال 1393 (300,222 حادثه)  جمع آوری شده و نوع ریسک و آسیب مربوط به هر یک از حوادث براساس معیارهای سازمان بین المللی کار مشخص ‌شده و در یک ماتریس ریسک- آسیب ( 1818) طبقه بندی گردید. با استفاده از تحلیل تناظر ابعاد به صورت جداگانه شناسایی می گردند، ابعاد مربوطه بیشترین وابستگی بین ریسک‌ها و آسیب‌ها را نشان می دهند که باعث تسهیل تصمیم گیری در مرحله ارزیابی ریسک در شرکت های تحت پوشش سازمان تامین اجتماعی می گردند. یافته ها: معیار هیر پیشنهاد میکند ابعادی با اینرسی بالاتر از 0/2 برای مطالعه و تفسیر نتایج مناسب می باشند، بر این اساس در این مطالعه از میان ابعاد بدست آمده ابعادی با اینرسی (مقدار ویژه) بالاتر از 0/2 شامل بعد1، بعد2 و بعد3 را در نظر می گیریم و میزان همبستگی بین متغیرها براساس مقدار تکین (فاصله متغیرها از مرکز ثقل) بدست می آید(مقدار تکین بعد1: 0/750، مقدار تکین بعد2:  0/647 و مقدار تکین بعد3: 0/521). نتیجه گیری: ابعاد بدست آمده باعث ایجاد فرصت های جدید در جهت توسعه برنامه های کاربردی به منظور تحلیل، تفسیر و مدیریت خودکار حوادث شغلی در راستای به حداقل رساندن عدم قطعیت و افزایش عینیت که با روش های فعلی قابل دست یابی نیست، می گردد. در این مطالعه ثابت شده است که این سه بعد بدست آمده، خلاصه ای از حوادث شغلی را نمایش می دهند.}, keywords_fa = {تحلیل تناظر, ماتریس ریسک-آسیب, ریسک, آسیب, حوادث شغلی}, doi = {10.21859/johe-03041}, url = {http://johe.umsha.ac.ir/article-1-235-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-235-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2017} } @article{ author = {Pakjoo, Akbar and MirzaEbrahimTehrani, Mahnaz and Malmasi, Sai}, title = {Assessing the effectiveness of HSE Management Programs And Its Relationship With jobSatisfaction، One of the vegetable oil production plant at the West of Tehran}, abstract ={Background & Objectives: Today Every organization in order  to survive and develop, need safe and efficient staffing and to use appropriate and worthy of this investment . Accomplishing this goal,  is possible only by executing programs in HSE management seamlessly until to eliminate parallel activities and to create a balance in current Affairs effective organization and by motivating staff and to increase productivity and save money. The original purpose of this reserch is  to study efectiveness of HSE management programs and its relationship with job satisfaction in  offered plant. Methods: The method  of this research is  survey and data analysis  is descriptive-analytic. The statistical  society is  60 persons of Noosh Azar Company who was determined by using cocran formula and randomly. The assessment tool is  a researcher made questionnaire which the validity was confirmed by professors and faculty members and its reliability was measured by using Cronbach. Data were analyzed using SPSS 22. Conclusions: The results were  that the between total score of HSE programs and total score of job satisfaction and all of the aspects of them, before and after the intervention there was a significant and positive correlation. Ranking in the field of management indicators HSE, for "professional health control programs" and the job satisfaction index ranking, for "technical management" was the highest score. Results: Considering the significant relationship between job satisfaction and HSE management programs, as these programs are implemented coherently and more and more quality it will be more effective on  the employee satisfaction.}, Keywords = {Job Satisfaction, HSE management, Effectiveness}, volume = {3}, Number = {4}, pages = {10-21}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی اثربخشی برنامه‌های مدیریت ایمنی، بهداشت و محیط‌زیست (HSE) و ارتباط آن با رضایت شغلی ، مورد مطالعه: یکی ازواحدهای تولید روغن نباتی غرب تهران}, abstract_fa ={زمینه وهدف: امروزه هرسازمانی برای ادامه حیات و توسعه خود به داشتن نیروی انسانی سالم و کارآمد و به‌کارگیری به‌جا و شایسته از این سرمایه نیازمند است و تحقق این امر تنها با اجرای برنامه‌هایی در قالب مدیریتHSE به ‌صورت یکپارچه امکان‌پذیر است تا ضمن حذف فعالیت‌های موازی باعث ایجاد تعادل در امور  سازمان شده و با ایجاد انگیزه در کارکنان به‌صرفه جویی در هزینه‌ها و افزایش بهره‌وری منجر ‌شود. هدف اصلی آن بررسی اثربخشی برنامه‌های مدیریت HSE و ارتباط آن با رضایت شغلی در کارخانه نوش آذر می باشد. روش بررسی:  روش تحقیق  به‌صورت پیمایشی و تجزیه‌وتحلیل داده‌ها به‌صورت توصیفی-تحلیلی است. جامعه آماری آن، کارکنان نوش آذر  که با استفاده از فرمول کوکران و با روش  تصادفی تعداد 60 نفر تعیین گردید. ابزار سنجش، پرسشنامه‌ محقق ساخته ای بود که روایی آن با استفاده از نظرات اساتید و اعضای هیئت‌علمی تائید وپایایی آن با روش کرونباخ، مورد سنجش قرار گرفت. داده‌ها با نرم‌افزار 22spss تجزیه‌وتحلیل گردید. یافته ها: نتایج نشان داد که بین نمره کلی برنامه‌های مدیریت HSE و نمره کلی رضایت شغلی و تمامی ابعاد آن قبل و بعد  از مداخله رابطه مثبت و معنی‌داری وجود دارد.در زمینه رتبه‌بندی شاخص های مدیریت HSE، شاخص "برنامه های کنترلی بهداشت حرفه ای" و در زمینه رتبه‌بندی شاخص‌های رضایت شغلی، شاخص"مدیریت فنی" دارای بیشترین نمره بود. نتیجه گیری: با توجه به معنی‌داری رابطه بین برنامه‌های مدیریت HSE و رضایت شغلی، هرچه این برنامه‌ها به‌صورت منسجم و دقیقتر و باکیفیت بیشتری اجرا شود اثر آن بر رضایت کارکنان بیشتر خواهد بود .}, keywords_fa = {رضایت شغلی, مدیریت HSE ,اثربخشی}, doi = {10.21859/johe-03042}, url = {http://johe.umsha.ac.ir/article-1-213-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-213-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2017} } @article{ author = {Azhdari, Mohammadreza and MonazamiTehrani, Ghazaleh and Alibabaei, Ahm}, title = {Investigating the causes of human error-induced incidents in the maintenance operations of petrochemical industry by using HFACS}, abstract ={Background & Objectives: Maintenance is an important tool for the petrochemical industries to prevent of accidents and increase operational and process safety success. The purpose of this study was to identify the possible causes of incidents caused by human error in the petrochemical maintenance activities by using Human Factors Analysis and Classification System (HFACS). Methods: This study is a cross-sectional analysis that was conducted in Zagros Petrochemical Company, Asaluyeh-Iran. A checklist of human error-induced incidents was developed based on four HFACS main levels and nineteen sub-groups. Hierarchical task analysis (HTA) technique was used to identify maintenance activities and tasks. The main causes of possible incidents were identified by checklist and recorded. Corrective and preventive actions were defined depending on priority.   Results: The content analysis of worksheets of 444 activities showed 37.6% of the causes at the level of unsafe actions, 27.5% at the level of unsafe supervision, 20.9% at the level of preconditions for unsafe acts and 14% of the causes at the level of organizational effects. The HFACS sub-groups showed errors (24.36%) inadequate supervision (14.89%) and violations (13.26%) with the most frequency. Conclusion: In order to prevent and reduce the occurrence of the identified errors, reducing the rate of the detected errors is crucial. Findings of this study showed that appropriate controlling measures such as periodical training of work procedures and supervision improvement decrease the human error-induced incidents in petrochemical industry maintenance.}, Keywords = {human error, petrochemical industry, maintenance, HFACS}, volume = {3}, Number = {4}, pages = {22-30}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی علل رویدادهای ناشی از خطای انسانی در عملیات های تعمیر و نگهداشت در صنعت پتروشیمی با استفاده از HFACS}, abstract_fa ={زمینه و هدف: این مطالعه به بررسی علل رویدادهای احتمالی ناشی از خطاهای انسانی در عملیات های تعمیر و نگهداشت صنعت پتروشیمی به کمک HFACS می پردازد و هدف آن پیش بینی و شناسایی این علل و ارائه اقداماتی به منظور کاهش و پیشگیری از آنهاست. روش بررسی: در این مطالعه اداره تعمیرات شرکت پتروشیمی زاگرس واقع در عسلویه جهت بررسی انتخاب شد. چک لیستی از علل بروز رویدادهای ناشی از خطای انسانی بر اساس سطوح 4 گانه و گروه های علتی 19 گانه در HFACS تهیه گردید. سپس به کمک تکنیک HTA فعالیت ها و وظایف کاری تعیین و با استفاده از چک لیست، علل 19 گانه در بروز خطاهای انسانی شناسایی و ثبت شد. سپس اولویت اقدامات اصلاحی و پیشگیرانه تعیین شد. یافته ها: نتایج حاصل از تحلیل برگه های کار 444 فعالیت تعمیراتی نشان داد که در سطوح 4 گانه HFACS ، 37.6% از علل در سطح اعمال نا ایمن، 27.5% از علل در سطح نظارت و سرپرستی نا ایمن، 20.9% از علل در سطح پیش شرط های اعمال نا ایمن و 14% از علل در سطح تاثیرات سازمانی قرار دارند. در گروه های علتی نیز خطاها با 24.3% ، سرپرستی و نظارت ناکافی با 14.8% و تخلفات با 13.2% ، بیشترین میزان علل را به خود اختصاص می دهد. نتیجه گیری: بر طبق یافته ها، افزایش اثربخشی آموزش کارکنان و بهبود نظارت بر عملکرد کارکنان به ترتیب بیشترین نقش را در کاهش وقوع رویدادهای ناشی از خطای انسانی در عملیات های تعمیر و نگهداشت پتروشیمی دارند.}, keywords_fa = {خطای انسانی, پتروشیمی, تعمیر و نگهداشت, HFACS}, doi = {10.21859/johe-03043}, url = {http://johe.umsha.ac.ir/article-1-220-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-220-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2017} } @article{ author = {Bakhshi, Ehsan and Kalantari, Rez}, title = {Investigation of quality of work life and its relationship with job performance in health care workers}, abstract ={Introduction: Healthcare centers are one of main organizations which play important role in maintaining people s health by providing healthcare services. Therefore, paying attention to quality of work life (QWL) & job performance in healthcare workers is very important. The aim of this study was assessment of quality of work life and job performance in health care workers and their relationship with demographic & contextual factors. Method: This cross sectional study conducted on 136 healthcare workers of healthcare centers in Islam Abad West city. Data collection tools were 3 questionnaires: demographics, Quality of work life and job performance questionnaire. In order to data analysis, descriptive statistics, independent sample t-test, one way ANOVA and Pearson correlation coefficient were used. Result: The Mean (Standard Deviation) of age of healthcare workers was 36.42 (8) years. Most of practitioners in this study were female and married. The Mean (Standard Deviation) score of QWL and job performance were 76.91 (13.25) & 52.5 (9), respectively. There was a significant relationship between QWL and job performance scores (p-value<0.001). Furthermore, the relationship between QWL with educational level and between job performance with sex and educational level were significant (p-value<0.05). Conclusion: Quality of work life was in a lower than average level and job performance was higher than average. Solutions such as increase of salary, encourage employees to continuing their educations, provide retraining course that are related to job can be useful to improve current situation.}, Keywords = {Job performance, Quality of work life, Healthcare workers, Healthcare centers}, volume = {3}, Number = {4}, pages = {31-37}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی کیفیت زندگی کاری و ارتباط آن با عملکرد شغلی در کارکنان مراکز بهداشتی درمانی}, abstract_fa ={مقدمه: مراکز بهداشتی و درمانی از مهم‌ترین سازمان‌هایی هستند که با ارائه خدمات بهداشتی و درمانی به مردم نقش مهمی در تأمین سلامتی افراد جامعه بر عهده‌دارند. لذا توجه به کیفیت زندگی کاری و عملکرد شغلی شاغلین این مراکز دارای اهمیت می‌باشد. مطالعه حاضر باهدف بررسی کیفیت زندگی کاری، عملکرد شغلی و بررسی رابطه آن‌ها با عوامل دموگرافیک و زمینه‌ای انجام گرفت.  روش: این مطالعه به‌صورت مقطعی روی 136 نفر از شاغلین مراکز بهداشتی درمانی و خانه بهداشت‌های شهرستان اسلام‌آباد غرب انجام گرفت. ابزار جمع‌آوری داده‌ها شامل سه پرسشنامه مشخصات دموگرافیک، کیفیت زندگی کاری و عملکرد شغلی بود. داده‌ها با استفاده از آمار توصیفی و آزمون‌های تی مستقل، آنالیز واریانس یک‌طرفه و ضریب همبستگی پیرسون آنالیز شدند. یافته‌ها: میانگین و انحراف معیار سنی شاغلین موردبررسی 36/42 (8) سال بود. بیشتر افراد شرکت‌کننده در مطالعه زن و متأهل بودند. میانگین و انحراف معیار امتیاز کیفیت زندگی کاری و عملکرد شغلی به ترتیب 76/91 (13/25) و 52/5(9) بود. میان کیفیت زندگی کاری و عملکرد شغلی رابطه معنی‌دار یافت شد (0/001 = p-value). کیفیت زندگی کاری با سطح تحصیلات و عملکرد شغلی با جنسیت و سطح تحصیلات رابطه معنی‌دار داشتند (0/05 > p-value). نتیجه‌گیری: کیفیت زندگی کاری کارکنان متوسط به پایین و عملکرد شغلی متوسط به بالا می‌باشد. راهکارهایی چون افزایش حقوق، تشویق کارکنان به ادامه تحصیل و فراهم آوردن کلاس‌های بازآموزی مرتبط با شغل می‌توانند در بهبود وضعیت موجود مؤثر باشند.}, keywords_fa = {کیفیت زندگی کاری, عملکرد شغلی, کارکنان مراکز بهداشتی درمانی, مراکز بهداشتی درمانی}, doi = {10.21859/johe-03044}, url = {http://johe.umsha.ac.ir/article-1-201-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-201-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2017} } @article{ author = {Azad, Parisa and Choobineh, Alireza and Ghaffari, Fari}, title = {Musculoskeletal Disorders Risk Assessment in Patient Transfers among Nurses in a hospital in Tehran Using MAPO Technique and provide control measures}, abstract ={Background: One of the major problems in hospitals that resulting in a high prevalence of musculoskeletal disorders among employees is activities related to handling patients. This study investigated  the prevalence of musculoskeletal disorders in people with patient handling task using MAPO index in 2015 In one of the military hospitals in Tehran. Methods: This cross-sectional study among 230 nurses in a 400-bed military hospital in Tehran. The instruments used in the study included the Nordic Questionnaire, MAPO index checklist, demographic questionnaire . Results: The main results can be the high prevalence of musculoskeletal disorders among employees, especially low back disorders, shoulder, wrist, and so on that back pain (75%) were most common among employees also the frequency of musculoskeletal disorders in female employees most of the employees were men. Conclusion: The results of this study show that the prevalence of musculoskeletal disorders among nursing personnel with patient handling task is high and therefore the need for intervention ergonomic in design environments and tools at the same time educational intervention there.}, Keywords = {Musculoskeletal disorders, nursing personnel, MAPO, handling patients}, volume = {3}, Number = {4}, pages = {38-45}, publisher = {Hamedan University of Medical Sciences}, title_fa = {ارزیابی ریسک کمر درد ناشی از جابجایی بیمار با استفاد از شاخص MAPO در پرسنل پرستاری یکی از بیمارستان های تهران و ارائه راهکارهای کنترلی}, abstract_fa ={مقدمه: یکی از عمـده تــرین مشـکلات در بیمارستـان که منجـر به شیـوع بالای اختلالات اسکلتی-عضلانی در بین کارکنان آن می شود مربـوط به فعالیتـهای حمـل و جابــجایی بیـماران است. این تحقیق به منظور بررسی شیوع اختلالات اسکلتی عضلانی در افراد دارای وظیفه جابه جایی بیمار با استفاده از شاخص MAPO در سال 1394 در یکی از بیمارستان های نظامی شهر تهران انجام گرفت. روش کار: این پژوهش مقطعی در بین 230 نفر از پرستاران یکی از بیمارستان های نظامی 400 تختخوابی شهر تهران انجام گرفت. روش گردآوری اطلاعات پرسشنامه نوردیک، چک لیست های ارزیابی بار ناشی از جابجایی بیمار به روش MAPO و پرسشنامه ویژگی های دموگرافیکی بود. تجزیه و تحلیل آماری داده ها با استفاده از نرم افزار SPSS نسخه 16 انجام گرفت و برای بررسی ارتباط بین متغیرها از آزمون آماری کای دو استفاده گردید. یافته­ ها: از اهم نتایج می توان به بالا بودن شیوع اختلالات اسکلتی عضلانی در بین کارکنان به خصوص اختلالات کمر، شانه، مچ و غیره اشاره کرد که کمر درد (75%) بیشترین شیوع را در بین کارکنان داشت همچنین درصد فراوانی اختلالات اسکلتی عضلانی در کارکنان زن بیشتر از کارکنان مرد بود. نتیجه­ گیری: نتایج مطالعه حاضر نشان می دهد که شیوع اختلالات اسکلتی عضلانی در بین پرسنل پرستاری دارای وظیفه جابه جایی بیمار بالا می باشد و لذا نیاز به مداخله ارگونومیکی در طراحی محیط، ابزار و تجهیزات همزمان با مداخله آموزشی وجود دارد.}, keywords_fa = {اختلالات اسکلتی عضلانی, پرسنل پرستاری, MAPO, جابجایی بیمار}, doi = {10.21859/johe-03045}, url = {http://johe.umsha.ac.ir/article-1-205-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-205-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2017} } @article{ author = {Takalobighash, Hamed and Karimi, Safora and Kalatpour, Omi}, title = {Evaluation of the Emergency Preparedness Level at Training Complex of Hamadan University of Medical Sciences through Using ISO 22399:2003}, abstract ={Background:  emergencies can impose huge dolls on the organizations. Such consequences, due to aggregation of the experts, could lead to the more catastrophic outcomes in the academic environments. Usually, the academic environments are less familiar with the management of the emergencies. The present paper tries to measure the preparedness level against the emergencies in the Hamadan University of Medical Sciences. Method: a basic checklist was developed based on the ISO 22399:2003. The, an audit team was established and conducted the audit process. Five core element that were investigated included: planning, organizational structure, resources, communication and scenario analysis. These items were scored 0-3 according to the sampling audit evidences. Results: the overall status of all elements were assessed as the "unacceptable". The least score belonged to the scenario analysis and the most was related to the resources. Discussion: regarding the obtained results, it seems that there is a vital need to establishing an emergency management system for Hamadan University of Medical Sciences. The most practical offer is following the accepted standards for implementing an emergency management system.}, Keywords = {emergency preparedness, university, audit}, volume = {3}, Number = {4}, pages = {46-52}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی میزان آمادگی مجتمع آموزشی دانشگاه علوم پزشکی همدان در مواجهه با شرایط اضطراری با استفاده از راهنمای ISO 22399:2003 و ارایه راهکارهای بهبود آمادگی}, abstract_fa ={مقدمه: بروز شرایط اضطراری می تواند اثرات جبران ناپذیری به سازمان ها وارد نماید. چنین پیامدهایی در یک محیط دانشگاهی که تجمعی از سرمایه های علمی کشور حضور دارند می توانند شدیدتر شود. معمولا محیط های دانشگاهی به دلیل ماهیت غیرصنعتی که دارند کمتر به موضوعاتی مانند آمادگی و طرحریزی در برابر شرایط اضطراری پرداخته اند. در این مقاله سعی شده است که میزان آمادگی مجتمع آموزشی دانشگاه علوم پزشکی همدان در برابر شرایط اضطراری احتمالی سنجیده شود. روش کار: جهت تدوین چک لیست های ابتدایی از استاندارد ایزو 22399 استفاده شد. یک تیم ممیزی تشکیل شده و مجتمع آموزشی دانشگاه علوم پزشکی را بر اساس پنج سرفصل اصلی: طرحریزی، منابع، ساختار سازمانی، ارتباطات و شناسایی سناریوها مورد ارزیابی قرار داد. نحوه نمره دهی هم بر اساس یک مقدار عددی از 0 تا3 طراحی شد. اصول کلی مورد استفاده در نمونه برداری هم بر اساس جمع آوری شواهد و مقایسه آن با معیارهای ممیزی بود. نتایج: وضعیت آمادگی مجتمع آموزشی دانشگاه علوم پزشکی همدان در برابر شرایط اضطراری در هیچ یک از سرفصل های اصلی مورد بررسی مناسب قلمداد نشده و حداقل نمره هم کسب نگردید. کمترین نمره مربوط به شناسایی و ارزیابی سناریوها و بیشترین نمره هم به منابع موجود مربوط می شد. بحث: با توجه به نتایج کسب شده به نظر می رسد که به طراحی و استقرار یک سیستم مدیریت شرایط اضطراری، متناسب با محیط های دانشگاهی و آموزشی نیاز باشد. عملی ترین پیشنهاد ممکن، استقرار چنین سیستمی بر اساس استانداردهای مشابه در دسترس می باشد.}, keywords_fa = {آمادگی در برابر شرایط اضطراری, دانشگاه, ممیزی}, doi = {10.21859/johe-03046}, url = {http://johe.umsha.ac.ir/article-1-225-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-225-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2017} } @article{ author = {Bakhshi, Ehsan and Mazlomi, Adel and Hoseini, Seyed Mostaf}, title = {Mental Workload and Its Determinants among Nurses in One Hospital in Kermanshah City, Iran}, abstract ={Background & Aims: Mental workload is one of the factors influencing the behavior, performance and efficiency of nurses in the workplace. There are diverse factors that can affect mental workload level. present study performed with the aim of Surveying Mental Workload and its Determinants among Nursing in one of hospital in Kermanshah City Materials and methods: In this cross-sectional study, 203 nurses from 5 wards of infants, emergency, surgery, internal and ICU were selected randomly and surveyed. Data collection tools were demographics and NASA-TLX questionnaires. The statistical data analysis conducted using Independent sample  t-test, ANOVA and Pearson correlation coefficient using software SPSS 19. Results: The mean and standard deviation of overall  mental workload estimated as 69.73±15.26. Among  aspects of mental workload,  the aspect of  effort with an average score of 70.96 was the highest and the aspect of frustration and disappointment with average of 44.93 was the lowest one. There were significant relationship between physical aspect of workload with age, type of shift working, number of shifts, type of employment, between temporal aspect of workload with BMI, type of employment and work experience, and between effort aspect with BMI (p-value≤0/05). Conclusion: Due to the different amount of mental workload in studied hospital wards, relocation of nurses between wards can improve situation and increase the number of nurses can lead to decrease mental workload.}, Keywords = {Mental Workload, Nurses, Hospital, NASA-TLX}, volume = {3}, Number = {4}, pages = {53-60}, publisher = {Hamedan University of Medical Sciences}, title_fa = {بررسی بارکار ذهنی و عوامل موثر بر آن در پرستاران یکی از بیمارستان های کرمانشاه}, abstract_fa ={مقدمه: یکی از عوامل تأثیرگذار بر رفتار، عملکرد و کار آیی پرستاران در محیط کار، بارکار ذهنی می باشد. عوامل مختلفی می توانند بر میزان بار کار ذهنی موثر باشند. مطالعه حاضر با هدف بررسی  بارکارذهنی و عوامل موثر بر آن در پرستاران یکی از بیمارستان‌های شهر کرمانشاه انجام گرفت.            مواد و روش‌ها: در این مطالعه توصیفی – تحلیلی از نوع مقطعی، 203پرستار شاغل در بخش­های اطفال، اورژانس، جراحی، داخلی و مراقبت­های ویژه بصورت تصادفی انتخاب شده و مورد بررسی قرار گرفتند. ابزارهای مورداستفاده در این مطالعه پرسشنامه دموگرافیک و پرسشنامه NASA-TLX بود. تجزیه‌ و تحلیل داده‌ها با آزمون­های آماری تی مستقل، آنالیز واریانس و ضریب همبستگی پیرسون و با استفاده از نرم‌افزار SPSS  نسخه 16 انجام شد. یافته‌ها: میانگین و انحراف معیار بارکار ذهنی کل(15/26±69/73) بود. در میان ابعاد مختلف بارکارذهنی، بعد سعی و تلاش با میانگین و انحراف معیار (15/23±70/96) بیشترین و بعد احساس ناکامی و دلسردی با میانگین (25±44/93) کمترین میزان را به خود اختصاص دادند. بین حیطه بار فیزیکی با سابقه خدمت، سن، الگوی کاری، تعداد شیفت، نوع استخدام، حیطه فشار زمانی با شاخص توده بدن،  سابقه خدمت، نوع استخدام و حیطه تلاش و کوشش با شاخص توده بدن رابطه معنی‌دار به دست آمد. (0/05≥P-value). نتیجه‌گیری: با توجه به اینکه میزان بارکار ذهنی در بخش های مورد مطالعه متفاوت می باشد، جا بجایی پرستان در بخش های مختلف در بهبود وضع موجود و افزایش تعداد پرستاران می تواند در کاهش بارکارذهنی موثر باشد.}, keywords_fa = {بارکارذهنی, پرستاران, بیمارستان, ناسا تی ال ایکس}, doi = {10.21859/johe-03047}, url = {http://johe.umsha.ac.ir/article-1-255-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-255-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2017} } @article{ author = {Nakhaeipour, Mojtaba and Shojaeefarahabadi, Hosein and Najarian, Faranak and Safinejad, Mahvash and Irvani, Has}, title = {Determining the efficiency of ZSM-5 zeolite impregnated with nanoparticles of titanium dioxide in the photocatalytic removal of styrene vapors}, abstract ={Introduction: Styrene monomer is a volatile organic compound that has many applications particularly in plastic, rubber and paint industries. According to the harmful effects of these compounds on human and environment, reducing and controling of them seem necessary. Therefore, in this study removal of styrene was investigated using photocatalytic process of titanium dioxide nanoparticles stabilized on ZSM-5. Methods: After stabilization of titanium dioxide nanoparticles on ZSM-5 zeolite, BET, SEM and XRD analysis were used to determine the characteristics of nanoparticles. Experiments were conducted at ambient temperature in laboratory scale. Concentration of produced styrene in the experiments was 50 and 300 ppm, and input flow rate was 1 l/min. Results: images and spectra obtained through XRD and SEM-EDAX showed that  nano-catalysts are well- stabilized. The results showed that by increasing of input concentration of styrene from 50 to 300 ppm, photocatalytic removal efficiency are reduced. Also, adsorption capacity of the catalyst bed in concentrations of 50 and 300 ppm was calculated 16.3 and19.4 mg/gr of adsorbent respectively. Conclusion: The results show that the use of hybrid bed can increase the removal efficiency of contaminants. And due to low cost of application of these systems compared to conventional methods, it is recommended that more comprehensive studies to be done regarding the optimization of the parameters affecting the process of photocatalytic removal.}, Keywords = {styrene, removal efficiency, titanium dioxide, zeolite ZSM-5}, volume = {3}, Number = {4}, pages = {61-67}, publisher = {Hamedan University of Medical Sciences}, title_fa = {تعیین کارآیی زئولیت ZSM-5 آغشته به نانو ذرات دی اکسید تیتانیوم در حذف فتوکاتالیستی بخارات استایرن}, abstract_fa ={مقدمه: مونومر استایرن یک ترکیبات آلی فرار می باشد که امروزه کاربرد های زیادی به ویژه در صنایع پلاستیک، لاستیک و رنگ سازی دارد. با توجه به اثرات مخرب انسانی و زیست محیطی این ترکیبات، کاهش و کنترل آنها امری ضروری به نظر می­رسد، لذا در این مطالعه حذف استایرن با استفاده از فرآیند فتوکاتالیستی نانوذرات دی اکسید تیتانیوم تثبیت شده بر روی ZSM-5 مورد بررسی قرار گرفت. روش کار: پس از تثبیت نانو ذرات دی اکسید تیتانیوم بر روی بستر زئولیت ZSM-5 ، به منظور تعیین ویژگی های آن از آنالیزهای BET، SEM و XRD استفاده شد. آزمایشات در مقیاس آزمایشگاهی و در دمای محیط انجام شد. غلظت استایرن گازی تولید شده در آزمایشات  50 و300 ppm  می باشد. و دبی ورودی  l/min 1 تنظیم شد. یافته­ها:تصاویر و طیف­های بدست آمده از دستگاه XRD و SEM-EDAX نشان داد که عمل تثبیت نانو کاتالیست ها به خوبی انجام شده است. نتایج نشان داد که با افزایش غلظت ورودی استایرن از ۵۰ به ۳۰۰ پی پی ام کارآیی حذف فتوکاتالیستی کاهش می‌بابد، همچنین ظرفیت جذب برای بستر کاتالیستی تهیه شده در غظت های ۵۰ و ۳۰۰ پی­پی­ام به ترتیب برابر با 16/3 و  19/4 میلی گرم بر گرم جاذب محاسبه شد.}, keywords_fa = {استایرن, کارایی حذف, دی‌اکسید تیتانیوم, زئولیت ZSM-5}, doi = {10.21859/johe-03048}, url = {http://johe.umsha.ac.ir/article-1-236-en.html}, eprint = {http://johe.umsha.ac.ir/article-1-236-en.pdf}, journal = {Journal of Occupational Hygiene Engineering}, issn = {2383-3378}, eissn = {}, year = {2017} }